EPC Parts Catalogs

973 K Track-Type Loaders Control Valve (Bucket Lift) Caterpillar


  1. Home
  2. Specifications
  3. #127016
Control Valve (Bucket Lift)
`
973 K Track-Type Loaders [M0087727]
973 K Track-Type Loaders Fan Control Solenoid Valve
973 K Track-Type Loaders Control Valve (Bucket Tilt)
HYDRAULIC SYSTEM
VALVE GP-CONTROL
973 K Track-Type Loaders Control Valve (Bucket Lift)
973 K Track-Type Loaders Control Valve (Bucket Tilt)
973 K Track-Type Loaders Control Valve (Multipurpose Bucket)
973 K Track-Type Loaders Control Valve (Ripper)
Show/hide table
Illustration 1g06272908

Show/hide table
Table 1
Item  Qty  Part  Specification Description 
1  1  291-3787 Relief Valve Gp  Torque to 100 ± 10 N·m (74 ± 7 lb ft). 
2  1  096-3831 Orifice  Torque to 10 ± 2 N·m (89 ± 18 lb in). 
3  2  -  Tighten the nut to 20 ± 3 N·m (177 ± 27 lb in). 
4  2  313-7668 Solenoid Valve Gp  Torque to 35 ± 3 N·m (26 ± 2 lb ft). 
5  1  250-7531 Retainer Plug  Torque to 350 ± 53 N·m (258 ± 39 lb ft). 
6  1  236-9832 Spring  Length under test force is 38.0 mm (1.50 inch).
Test force is 75 N (17 lb).
Free length after test is 51.6 mm (2.03 inch). 
7  1  234-4851 Spring  Length under test force is 33.0 mm (1.30 inch).
Test force is 6.0 N (1.3 lb).
Free length after test is 36.53 mm (1.438 inch). 
8  1  234-4869 Makeup Valve  Torque to 100 ± 20 N·m (74 ± 15 lb ft). 
9  1  284-1010 Spring  Length under test force one is 50.5 mm (1.20 inch).
Test force one is 318.6 ± 25.0 N (71.6 ± 5.6 lb).
Length under test force two is 35.0 mm (1.38 inch).
Test force two is 1210.0 ± 97.0 N (272.0 ± 21.8 lb).
Free length after test is 56.04 mm (2.206 inch). 
10  1  284-1011 Spring  Length under test force one is 47.5 mm (1.87 inch).
Test force one is 135.0 ± 11.0 N (30.4 ± 2.5 lb).
Length under test force two is 32.0 mm (1.26 inch).
Test force two is 662.0 ± 53.0 N (148.8 ± 11.9 lb).
Free length after test is 51.47 mm (2.026 inch). 
11  1  260-3058 Bolt  Torque to 35.0 ± 3.5 N·m (25.8 ± 2.6 lb ft). 

Information System:

C9.3 Tier 4 Final Engines Cooling System
973D Track-Type Loader Engine Valve Lash - Check
Repair and Reinforcement of the Rear Frame for the 988G and 988H Machines in Special Applications{7051}
C9.3 Tier 4 Final Engines Basic Engine
973D Track-Type Loader Hydraulic System Lift Circuit
C9.3 Tier 4 Final Engines General Information
D5R Track-Type Tractor Implement Cycle Time Is Slow
973D Track-Type Loader Hydraulic System Ripper Circuit
973D Track-Type Loader Hydraulic System Signal Resolver Network
973D Track-Type Loader Hydraulic System Multipurpose Bucket Circuit
973D Track-Type Loader Hydraulic System Bucket Control
2009/06/15 The Engine Enclosure May Need to Be Updated {7267, 7276}
973K Track-Type Loader Systems Piston Pump (Implement)
3512C and 3516C Marine Auxiliary and Generator Set Engines Rotating Rectifier - Check
C9.3 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Cooled by Coolant
D6T Track-Type Tractor Hydraulic System Piston Pump (Implement)
D5R Track-Type Tractor Ripper Does Not Function
2009/10/01 New Turbochargers and New Heatshields are Now Used {1052, 1067, 1073}
2009/06/01 The Assembly Process for the Front Axle Mount is Now Improved {3258, 3260}
2009/06/15 Improved Routing of the Harness Enhances Reliability {1408, 5063, 5705}
D5R Track-Type Tractor Connector Contact Description
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C9.3 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
973 K Track-Type Loaders Control Valve (Bucket Tilt)