Access Platform (Operator Lift)
`
993K Wheel Loader Electrohydraulic System
[KENR5826]
993K Wheel Loader Electrohydraulic System
Piston Motor (Hydraulic Fan)
993K Wheel Loader Electrohydraulic System
Tilt Cylinder
FRAME AND BODY
LIFT AR-OPERATOR
993K Wheel Loader Electrohydraulic System
Access Platform (Operator Lift)
Show/hide table
 | |
| Illustration 1 | g01358269 |
Access platform | |
Show/hide table
 | |
| Illustration 2 | g01358271 |
Top view | |
Show/hide table
 | |
| Illustration 3 | g01358272 |
View A-A | |
(1) Shim the bearings in order to center the plate assembly. The distance between the centers of the bearings should be equal to dimension (A).
Dimension (A) ... 250 ± 2 mm (9.84 ± 0.08 inch)
Show/hide table
 | |
| Illustration 4 | g01417361 |
Left side view | |
Show/hide table
 | |
| Illustration 5 | g01417444 |
View B-B | |
(2) Torque for eight bolts ... 50 N·m (37 lb ft)
Show/hide table
 | |
| Illustration 6 | g01417449 |
View C-C | |
(3) Adjust the clearance between the bracket assembly and the support assembly until you reach the minimum clearance that allows proper actuation of the lift.
Show/hide table
 | |
| Illustration 7 | g01417452 |
View D-D | |
(4) Equal shims are required in order to fill the gap. Center the guard with the plate assembly.
Information System:
994F Wheel Loader Power Train
Torque Converter (Lockup) - Assemble
D6K Track-Type Tractor Power Train
Equalizer Bar - Install
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Disassemble - Left Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Assemble - Left Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Disassemble - Right Side
D3K, D4K and D5K Track-Type Tractors Power Train
Piston Pump (Hydrostatic) - Assemble - Right Side
C4.4 (Mech) Industrial Engine
Fuel Injection Nozzles - Test/Exchange
994F Wheel Loader Power Train
Parking Brake - Disassemble
AD55B Underground Articulated Truck Power Train Electronic Control System
MID 027 - CID 0562 - FMI 09
AD55B Underground Articulated Truck Power Train Electronic Control System
MID 027 - CID 0562 - FMI 02
2007/03/12
New Software for the Engine ECM is Now Available {1902, 7620}
IT38H Integrated Toolcarrier and 938H Wheel Loader Power Train
Axle Housing (Short) - Remove
993K Wheel Loader Electrohydraulic System
Tilt Cylinder
D3K, D4K and D5K Track-Type Tractors Machine Systems
Gear Pump (Implement) - Remove
D3K, D4K and D5K Track-Type Tractors Machine Systems
Gear Pump (Implement) - Install
953D, 963D and 973D Track-Type Loaders
Using the Operator Monitor to Determine Diagnostic Codes
D3K, D4K and D5K Track-Type Tractors Machine Systems
Hydraulic Control Support - Remove and Install
D3K, D4K and D5K Track-Type Tractors Winch Systems
Valve Assembly - Remove
D3K, D4K and D5K Track-Type Tractors Winch Systems
Valve Assembly - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines
Event Codes
993K Wheel Loader Electrohydraulic System
Bucket Control
D3K, D4K and D5K Track-Type Tractors Machine Systems
Hydraulic Control Support - Disassemble
D3K, D4K and D5K Track-Type Tractors Machine Systems
Hydraulic Control Support - Assemble
994F Wheel Loader Power Train
Parking Brake - Assemble