PRIORITY - INSTALL A BRACKET TO SUPPORT THE TRANSMISSION DIPSTICK TUBE AT THE TRANSFER GEAR HOUSING ON CERTAIN 966F II AND 970F WHEEL LOADERS - COSA LETTER NO. 6 - PI3668 - MAILED COSA
NOTE:   The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.
HEBE1416 SEPTEMBER 30, 1993 COSA LETTER No. 6 ************ INSTALL A BRACKET TO SUPPORT THE TRANSMISSION * PRIORITY * DIP STICK TUBE AT THE TRANSFER GEAR HOUSING ON ************ CERTAIN 966F II AND 970F WHEEL LOADERS 3005 PI3668 COMPLETION DATE
March 31, 1994 September 30, 1994
The transmission Dip Stick Tube 107-1344 on certain 966F II and 970F Wheel Loaders may crack at the base of its mounting plate. This Dip Stick is located on the right hand side of the machine in the articulation area and allows the transmission oil level to be checked from ground level and improves the serviceability. The 107-1344 Dip Stick Tube can crack at the mounting plate base due to the unsupported length of the tube.
Model Identification Number 966F II 9YJ00183, 185, 188-282, 291-369, 371-386, 388-401, 403-407, 409-411, 414-427, 445, 446, 448-452, 454, 460, 464-479, 483, 485-499, 501, 502, 509, 518-520, 528-536, 538-569, 571, 573, 575, 577, 579-582, 584-590, 592, 594, 596-597, 599-601, 604, 606, 611, 615, 616, 618, 619, 621-626 and 628. 970F 9JK00098-174, 176-178, 180-184, 186-211, 213-226.
1 - 108-5680 Gage - Oil Level 1 - 109-3049 Bracket 1 - 6W2342 Spacer 1 - 8T9399 Bolt 1 - 8T4994 Washer 1 - 8T8917 Bolt 2 - 8T4223 Washer 1 - 6V8188 Nut 1 - 7S8920 Clip 1 - 7S8921 Clip
Mount the 109-3049 Bracket to the right hand side of the transfer gear housing as shown on the illustration (attached) using a 6W2342 Spacer, a 8T9399 Bolt and a 8T4994 Washer. The washer must be placed under the bolt head and the spacer between the washer and bracket. Position the 7S8920 and 7S8921 Clip halves around the 107-1344 Tube and bolt the clips to the bracket end with a 8T8917 Bolt, two 8T4223 Washers and a 6V8188 Nut. Remove the dip stick tube cover and replace it with the 108-5680 Gage. SERVICE CLAIM ALLOWANCE AVSpare Dealer Suggested Customer Suggest Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs (D/N) (Cost) (C/L) (Sell) 100 % 0.5 0 0 0 0
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. Attach. (1-Illustration)