PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC LIFT CYLINDER ON CERTAIN 910K, 914K, 920K, 910M, 914M, AND 918M COMPACT WHEEL LOADERS
[UEBE1344]
HYDRAULIC SYSTEM
CYLINDER GP
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC LIFT CYLINDER ON CERTAIN 910K, 914K, 920K, 910M, 914M, AND 918M COMPACT WHEEL LOADERS
UEBE1344-00
Show/hide table
| 27Oct2020 |
U-624
A-515
D-586
O-577
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC LIFT CYLINDER ON CERTAIN 910K, 914K, 920K, 910M, 914M, AND 918M COMPACT WHEEL LOADERS |
|
| 5102 | PS54461 |
|
Show/hide table
| NOTE: | AVSpare’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to AVSpare. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS54461" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2023 |
PROBLEM
Show/hide table
| The existing hydraulic lift cylinder housing end cap weld can crack on certain 910K, 914K, 920K, 910M, 914M, and 918M Compact Wheel Loaders. If the existing hydraulic lift cylinder housing end cap weld cracks, it can lead to a hydraulic oil leak, reduced tilt cylinder function performance, and reduced cylinder life. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| *******Group 1******* | |
| 910K | AY401909-03167 L2200152-00246 |
| 910M (T4F HRC) | H2200155-00394, 399-687, 689-775, 777-789, 791-836, 839, 846-2321, 2325-2335, 2337, 2340 |
| 914K | BF400150-00291 CD201020-01412 L2400154-00315, 317-318 |
| 914M (T4F HRC) | H2400156-00421, 423-585, 592-1354 |
Show/hide table
| *******Group 2******* | |
| 918M (T4F HRC) | H2600157-00489, 494-663, 665-1251 |
| 920K | B9800250-00319 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| *******Group 1******* | ||
| 1 | 3924568 | CYL GP-BASIC |
| 1 | HYD_OIL | HYDRAULIC OIL - 5 LITERS (HYD010) - SEE OMM |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
| *******Group 2******* | ||
| 1 | 4185340 | CYLINDER GP |
| 1 | HYD_OIL | HYDRAULIC OIL - 5 LITERS (HYD010) - SEE OMM |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Note: Read and understand the Operation and Maintenance Manual for safety information and safe working practices before starting this Rework Procedure. Note: Position the machine on firm level ground, engage park brake, shut off engine, remove ignition key and retain, turn on battery disconnect switch, and leave the machine to cool before proceeding with the remainder of the Rework Procedure. Rework Procedure: In the event of failure, refer to M0070736, Disassembly and Assembly, "Lift Cylinder - Remove and Install", for additional information. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
| *******Group 1******* | ||||||
0-24 mo |
||||||
25-48 mo |
||||||
| NOTE: This is a 3.0-hour job for Group 1 | ||||||
| Note: 5 Liters of bulk hydraulic oil is allowed if a plug vacuum assembly is used to complete the rework. |
Show/hide table
| *******Group 2******* | ||||||
0-24 mo |
||||||
25-48 mo |
||||||
| NOTE: This is a 3.0-hour job for Group 2 | ||||||
| Note: 5 Liters of bulk hydraulic oil is allowed if a plug vacuum assembly is used to complete the rework. |
PARTS DISPOSITION
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TILT CYLINDER ON CERTAIN 910K, 914K, 920K, 910M, 914M, AND 918M COMPACT WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHASSIS WIRING HARNESS ON CERTAIN D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SEAT HARNESS ON CERTAIN 953K, 963K, AND 973K TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOFTWARE ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING HOSE ASSEMBLIES ON CERTAIN D5 AND D6 TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DEF PUMP ON CERTAIN CATERPILLAR PRODUCTS EQUIPPED WITH A C7.1 ENGINE
PRODUCT SUPPORT PROGRAM FOR UT INSPECTION AND/OR REPLACING THE WHEEL AND FINAL DRIVE GROUP ON CERTAIN 980M WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING CERTAIN SUN GEARS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON ON CERTAIN 336F, 340F AND 352F EXCAVATORS, 725, 730 AND 735 ARTICULATED TRUCKS, 772G OFF-HIGHWAY TRUCKS, 826K LANDFILL COMPACTORS, 966, 972 AND 980 WHEEL LOADERS, D6T TRACK-TYPE TRACTORS, AND P
PRODUCT SUPPORT PROGRAM FOR REWORK OF THE 508-1607 FUEL TANK GROUP (FAST FILL) AND 508-1611 FUEL TANK GROUP (STANDARD) ON CERTAIN D5 XL AND LGP TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SHORT BLOCK ON CERTAIN D11T TRACK-TYPE TRACTORS THAT HAVE BEEN REPAIRED OR REPLACED WITH A REMAN C32 SHORT BLOCK (20R0195, 20R2866, 20R6928), LONG BLOCK (20R6342), OR ENGINE (10R8902, 20R2506, 20R2507)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRODUCT LINK RADIO ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN 938K AND 938M SMALL WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING, LABELING, AND REWORKING THE 580-8500-00 HARNESS THAT IS PART OF 580-8498-00 SERVICE AND MAINTENANCE (SAM) HARNESS TOOLING GROUP IN DEALER TOOL INVENTORY
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE LIFT CYLINDER DUE TO LOOSE ROD/PISTON LOCKNUT ON CERTAIN D10T2 TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 132-5125 WATER ELBOW ON CERTAIN D9R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LINKAGE PIN RETAINERS ON CERTAIN 966M AND 980M MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR TESTING AND ADJUSTING THE LOAD CHECK VALVES ON CERTAIN 924K, 930K, 938K, 926M, 930M, AND 938M SMALL WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121, PL321, PL542 SATELITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 9U-7763 PULLER STUDS FROM DEALER TOOL INVENTORY AND CUSTOMER TOOL INVENTORY, AND DEALER AND CUSTOMER SERVICE FACILITIES
PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING CERTAIN 20R6551 C15 REMAN ENGINES IN DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 5117975 FUEL PUMP ON CERTAIN C9.3 REMAN 20R4509, 20R5307, 20R6190, AND 20R6192 LONG BLOCKS, 20R7002, AND 20R7003 REMAN ENGINES IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ENGINE BLOCK FOR COOLANT LEAKS ON CERTAIN 415, 416, 420, 428, 430, 432, 434, AND 444 BACKHOE LOADERS, 910, 914, AND 920 COMPACT WHEEL LOADERS, D1, D2, AND D3 TRACK-TYPE TRACTORS, 313, 315, AND 317 EXCAVA
PRODUCT SUPPORT PROGRAM FOR REPLACING PRIMARY AND SECONDARY ENGINE FILTER ELEMENTS ON CERTAIN MD6250 ROTARY BLASTHOLE DRILLS