TH210 and TH215 Telehandlers Cooling System Coolant Extender (ELC) - Add Caterpillar


Cooling System Coolant Extender (ELC) - Add
`

------ WARNING! ------

Personal injury can result from hot coolant, steam and alkali.

At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.

Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.

Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.

Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.

----------------------

When a AVSpare Extended Life Coolant (ELC) is used, an extender must be added to the cooling system. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for the proper service interval. The amount of extender is determined by the cooling system capacity.

Table 1
AVSpare Extender (ELC)    
Cooling System Capacity     Recommended Amount of AVSpare Extender    

22 to 30 L (6 to 8 US gal)    

0.57 L (20 oz)    

30 to 38 L (8 to 10 US gal)    

0.71 L (24 oz)    

38 to 49 L (10 to 13 US gal)    

0.95 L (32 oz)    

49 to 64 L (13 to 17 US gal)    

1.18 L (40 oz)    

64 to 83 L (17 to 22 US gal)    

1.60 L (54 oz)    

83 to 114 L (22 to 30 US gal)    

2.15 L (72 oz)    

114 to 163 L (30 to 43 US gal)    

3.00 L (100 oz)    

163 to 242 L (43 to 64 US gal)    

4.40 L (148 oz)    

For additional information about adding an extender, consult your AVSpare Dealer.

Information System:

3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
966G II and 972G II Wheel Loaders Work Tool Positioner
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3054E Industrial Engine Electric Starting Motor - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Starting
854G Wheel Tractor and 992G Wheel Loader Power Train Torque Converter - Disassemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Operation Information
988G Wheel Loader Engine Oil Level - Check
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Install
988H Wheel Loader Operator Controls
953C Track-Type Loader Sound Information and Vibration Information
953C Track-Type Loader Monitoring System
966G II and 972G II Wheel Loaders Cooling System Coolant Sample (Level 1) - Obtain
953C Track-Type Loader Operation Information
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
966G II and 972G II Wheel Loaders Differential and Final Drive Oil - Change
966H and 972H Wheel Loaders Differential and Final Drive Oil Sample - Obtain
TH220B, TH330B and TH340B Telehandlers Machine Systems Transmission
953C Track-Type Loader Lubricant Viscosities
953C Track-Type Loader Circuit Breakers and Fuses - Reset/Replace
953C Track-Type Loader Hydrostatic Transmission and Hydraulic System Oil Sample - Obtain
3500B Series II Marine Engines System Overview