988G Wheel Loader Seat Caterpillar


Seat
`
1.1. Air Suspension

Note: The operator's seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.

Adjust the seat in order to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat.



Illustration 1g00997936

Air Suspension

The suspension control system is designed to automatically adjust the seat height to one of three positions: LOW, MID and HIGH. The suspension control system will then maintain that position within a preset range during the machine operation.

The seat suspension will automatically adjust the seat height to the selected position.

Fore and Aft Position (1) - Pull the lever upward. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position.

Backrest Cushion Angle (2) - Pull the lever upward. Hold the lever upward and adjust the backrest cushion to the desired angle. Release the lever in order to lock the backrest cushion into position.

Seat Height (3) - Pull the knob outward. Raise the seat to the desired position and release the knob.

Information System:

TH220B, TH330B and TH340B Telehandlers Boom Wear Pad Clearance - Inspect/Adjust
AD30 Underground Articulated Truck Machine Electrical System Actual Gear Indicator
AD30 Underground Articulated Truck Machine Electrical System Torque Converter Oil Temperature
AD30 Underground Articulated Truck Machine Electrical System Retarder
AD30 Underground Articulated Truck Machine Electrical System Engine Monitoring
AD30 Underground Articulated Truck Machine Electrical System Engine Shutdown
AD30 Underground Articulated Truck Machine Electrical System Engine Stop
AD30 Underground Articulated Truck Machine Electrical System Engine Start
988G Wheel Loader Warning Categories (Caterpillar Monitoring System)
980G Series II Wheel Loader Operator Controls
Finding the Top Center Position for No. 1 Piston on a D6R Series II Track-Type Tractor{1105}
836G Landfill Compactor and 834G Wheel Dozer Daily Inspection
2003/10/27 D11R Implement Pump Update Provides Improved Quality and Fewer Leaks {5084}
TH220B, TH330B and TH340B Telehandlers Lifting Capacities
D6N Track-Type Tractor Power Train Final Drive, Steering Planetary, and Brake (Right Side) - Remove
D6N Track-Type Tractor Power Train Final Drive, Steering Planetary, and Brake (Right Side) - Install
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Left Side Console for IT62G and 962G Parallel Lift Machines
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Window Wiper and Wiper Motor
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Transmission and Torque Converter - Remove
980G Series II Wheel Loader Monitoring System
TH220B, TH330B and TH340B Telehandlers Hydraulic System Location of Hydraulic Components
2003/06/09 A New Fuse Panel Is Used {1417}
Installation Instructions for the 2Q-8245 Fan Control Ar (Auto Reversing) (Kit){1386, 138R}
2003/06/01 SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}