963C Track-Type Loader Additional Messages Caterpillar


Additional Messages
`
1.1. Transmission and Parking Brake Lock (1)
2.1. Notice (2)
3.1. Notice (3)
4.1. Caution (4)


Illustration 1g00997448
(1) Transmission and parking brake lock. (2) Notice (shipping). (3) Notice. (4) Caution.

There are several specific messages on this machine. The exact location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all messages.

Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.

Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any AVSpare dealer can provide new messages.

Transmission and Parking Brake Lock (1)

The message is located on the front cover of the transmission control console next to the safety lever.



Illustration 2g00998192

Notice (2)

The message is located on the left hand side of the frame on the lift tower.



Illustration 3g00998295


NOTICE

Improper lifting or tie-downs can allow load to shift and cause injury and damage.


Notice (3)

The message is adjacent to the serial number on the bucket.



Illustration 4g00998195

The bucket is designed to accept the corner guard system for maximum life. Do not operate the bucket without proper components of the corner guard system. See your dealer for adaptability of teeth or bolt on edges.

Caution (4)

The message is located in the cab near the mounting supports and under the cab near the mounting supports.



Illustration 5g00998193

Use high strength bolts in the mounting supports.

Information System:

Installation of Double Lip Wiper Seal{7562}
2003/05/19 A New Pressure Switch for the Torque Converter Lockup is Now Used {1435, 3101}
Installation of the 156-7013 Radiator Field Upgrade Kit on the 994 Wheel Loader{1353}
963C Track-Type Loader Safety Messages
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Left Side Console for Electro-Hydraulic Work Tools
AD30 Underground Articulated Truck Machine Electrical System Coolant Temperature
AD30 Underground Articulated Truck Machine Electrical System Heating and Air Conditioning
AD30 Underground Articulated Truck Machine Electrical System Window Wiper and Washer
AD30 Underground Articulated Truck Machine Electrical System Speedometer/Tachometer
988H Wheel Loader Plate Locations and Film Locations
834H Wheel Dozer and 836H Landfill Compactor Specifications
D6K Track-Type Tractor Sound Information and Vibration Information
966G II and 972G II Wheel Loaders Rated Load
Torque Converter Output Temperature and Hydraulic Tank Temperature Correction for Certain Track Type Tractors{7490}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Electrical Input Components
980G Series II Wheel Loader Specifications
980G Series II Wheel Loader Rated Load
2003/05/12 New Bearing and Bearing Cap Improves Service Life {6062, 7115}
D11R Track-Type Tractor Hydraulic System Return Screen - Clean
836G Landfill Compactor and 834G Wheel Dozer Daily Inspection
Finding the Top Center Position for No. 1 Piston on a D6R Series II Track-Type Tractor{1105}
980G Series II Wheel Loader Operator Controls
988G Wheel Loader Warning Categories (Caterpillar Monitoring System)
AD30 Underground Articulated Truck Machine Electrical System Engine Start