988H Wheel Loader Plate Locations and Film Locations Caterpillar

The Product Identification Number (PIN) is used to identify a powered machine that is designed for an operator to ride.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN)

Illustration 1	g00996995
Left side of front frame

Machine PIN ____________________

Year of Manufacture____________________

European Union

Note: The CE plate is on machines that are certified to the valid European Union requirements at that time.

If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. The CE plate is positioned on the bottom left side of the plate for the PIN.

For machines compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.

Illustration 2	g01883459

• Engine Power primary engine (kW)____________________

• Engine Power for additional engine if equipped (kW)____________________

• Typical machine operating weight for European market (kg)____________________

• Year of construction____________________

• Machine Type____________________

For the name, the address and the country of origin for the manufacturer, see the PIN plate.

For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.

Illustration 3	g01062968

• Engine Power primary engine (kW)____________________

• Typical machine operating weight for European market (kg)____________________

• Year ____________________

Serial Number

AVSpare products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers. For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Illustration 4	g00997052
Rear view of the torque converter housing

Torque Converter Serial Number ____________________

Illustration 5	g01000186
Engine valve cover

Engine Serial Number ____________________

Illustration 6	g00838375
Right side of planetary case

Transmission Serial Number____________________

Certification

Sound

Illustration 7	g00933634
Typical example

If equipped, the film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound level. The guaranteed sound level is measured at the time of manufacture. Refer to Operation and Maintenance Manual, "Sound Information and Vibration Information" for the guaranteed sound level for your machine.

ROPS/FOPS Film

Illustration 8	g00944234

This warning film is located on the outside of the cab on the left side below the window. This machine has been certified to the standards that are listed on the certification label. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification label.