834H Wheel Dozer and 836H Landfill Compactor Specifications Caterpillar


Specifications
`
1.1. Intended Use
2.2. Application and Configuration Restrictions

These machines are equipped with a C-18 Engine.

Basic machine specifications are listed in the following tables.



Illustration 1g02002026

Table 1
834H Wheel Tractor 
Approximate Weight  43024 kg (94852 lb) 
Width Over Wheel Drums (A)  3470 mm (136.6 inch) 
Length with the Straight Bulldozer Arrangement (B)  9883 mm (389.1 inch) 
Length with the Universal Bulldozer Arrangement (B)  10416 mm (410.1 inch) 
Length with the Semi-Universal Bulldozer Arrangement (B)  10338 mm (407 inch) 
Width across the Straight Bulldozer Arrangement (D)  5074 mm (199.8 inch) 
Width across the Universal Bulldozer Arrangement (D)  5129 mm (202 inch) 
Width across the Semi-Universal Bulldozer Arrangement (D)  4708 mm (185 inch) 
Height over the ROPS (C)  4083 mm (161 inch) 


Illustration 2g02002028

Table 2
836H Landfill Compactor 
Approximate Weight  51726 kg (114036 lb) 
Width Over Wheel Drums (A)  4180 mm (164.6 inch) 
Length with the Landfill Bulldozer Arrangement (B)  10182 mm (400.9 inch) 
Length with the Universal Blade Arrangement (B)  10272 mm (404 inch) 
Length with the Semi-Universal Blade Arrangement (B)  10379 mm (409 inch) 
Width across the Landfill Bulldozer Arrangement (D)  5192 mm (204.4 inch) 
Width across the Universal Bulldozer Arrangement (D)  5258 mm (207.0075 inch) 
Width across the Semi-Universal Bulldozer Arrangement (D)  5311 mm (209.0941 inch) 
Height over the ROPS (C)  4549 mm (179 inch) 

Intended Use

The Wheel Dozer is a wheeled machine that is classified as a "Tractor-dozer". The machine is described in ISO 6165:2001. The machine propels the wheels forward. Also, the machine propels the wheels rearward. This allows the machine to move independently. The machine uses equipment such as a dozer blade which performs the following operations through forward motion of the machine: cut material, moving material and grading material. A mounted attachment may be used to exert a push or a pull.

The Compactor is a wheeled machine that is classified as a "Landfill Compactor". The machine is described in ISO 6165:2001. This machine uses front mounted equipment such as a blade or a bucket which performs the following operations through forward motion or the reverse motion of the machine: cut material, moving material, grading material and compacting material.

Application and Configuration Restrictions

The maximum approved operating weight for the 834H Wheel Dozer is 47106 kg (103850 lb).

The maximum approved operating weight for the 836H Landfill Compactor is 53682 kg (118348 lb).

The maximum slope for the Landfill Compactor is 25 percent or 14 degrees for proper lubrication and operational safety.

Information System:

D6K Track-Type Tractor Sound Information and Vibration Information
Procedure for Tagging Rental Fleet {1000, 6000, 6700, 7000}
AD30 Underground Articulated Truck Equipment Lowering with Engine Stopped
AD30 Underground Articulated Truck Machine Electrical System Parking Brake
AD30 Underground Articulated Truck Machine Electrical System Residual Brake Oil/Stop Light
D6N Track-Type Tractor Power Train Steering Planetary and Brake - Assemble
D6N Track-Type Tractor Power Train Steering Planetary and Brake - Disassemble
2005/12/19 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3258}
2003/05/12 New Components In The Oscillating Axle Improve Service Life {3278}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Location of Electrical Components
TH220B, TH330B and TH340B Telehandlers Hydraulic System General Information
Product Link 151/201 Spare Input Configure
988H Wheel Loader Plate Locations and Film Locations
AD30 Underground Articulated Truck Machine Electrical System Speedometer/Tachometer
AD30 Underground Articulated Truck Machine Electrical System Window Wiper and Washer
AD30 Underground Articulated Truck Machine Electrical System Heating and Air Conditioning
AD30 Underground Articulated Truck Machine Electrical System Coolant Temperature
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Left Side Console for Electro-Hydraulic Work Tools
963C Track-Type Loader Safety Messages
Installation of the 156-7013 Radiator Field Upgrade Kit on the 994 Wheel Loader{1353}
2003/05/19 A New Pressure Switch for the Torque Converter Lockup is Now Used {1435, 3101}
Installation of Double Lip Wiper Seal{7562}
963C Track-Type Loader Additional Messages
966G II and 972G II Wheel Loaders Rated Load