IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Left Side Console for Pilot Hydraulic Work Tools Caterpillar


Operator Controls - Left Side Console for Pilot Hydraulic Work Tools
`
1.1. Secondary Steering Test Switch (1) (If Equipped)
2.1. Hazard Flasher (2)


Illustration 1g00996117

Note: On later machines with pilot hydraulic bucket controls, the operator must perform one lift cycle in order to energize the electromagnetic detents. This feature prevents movement of the implement at start-up if the lift control has been accidentally moved to the detent.

On machines with pilot hydraulic bucket controls, the kickouts and the positioner must be adjusted manually.

Reference: Refer to the “Machine Adjustments” section of the Operation and Maintenance Manual for the correct adjustment procedures.

Secondary Steering Test Switch (1) (If Equipped)



Illustration 2g00997237

Secondary Steering Test Switch - Push the secondary steering switch in order to determine whether the secondary steering system and the alert indicator are functional. When the secondary steering switch is pushed, the secondary steering motor will run. Alert indicator (1B) will come on and the action alarm will sound. If alert indicator (1B) does not come on or the action alarm does not sound, do not operate the machine.

Alert indicator (1A) indicates a failure of the primary steering. When alert indicator (1B) flashes, the secondary steering system is active. When the alert indicators come on and the action alarm sounds, steer the machine immediately to a convenient location and stop the machine. Stop the engine and investigate the cause of the failure. Do not operate the machine until the cause of the failure has been corrected.

The AVSpare Monitoring System will perform a self test of the secondary steering during engine start-up. Alert indicator (1B) will come on for three seconds in order to verify the pressurization of the secondary steering system. The action alarm will sound until the end of the self test or until the engine is started.


NOTICE

Do not use the secondary steering as a limp home mode procedure.

Continuing to operate the machine by using the secondary steering may result in damage to the secondary steering system.


Hazard Flasher (2)

Hazard Flasher - The hazard flasher is activated by this switch. Push the bottom of the switch in order to activate the hazard flasher. Push the top of the switch in order to deactivate the hazard lights.

An indicator light on the front dash panel will flash when the hazard flasher is activated.

Information System:

992G Wheel Loader Machine Systems Bucket - Install
2003/05/01 New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
D6R Series II and D7R Series II Track-Type Tractors AccuGrade Laser Troubleshooting
2003/05/01 New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Right Side Console (Earlier Machines)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Right Side Console (Later Machines)
615C Series II Wheel Tractor-Scraper Air System and Brakes General Information
AD30 Underground Articulated Truck Braking System Parking Brake System Pressure - Test
D6R Series II and D7R Series II Track-Type Tractors AccuGrade Laser General Maintenance Information
3054E Engine for Caterpillar Built Machines Idler Gear - Remove and Install
992G Wheel Loader Machine Systems Bucket - Remove
3054E Industrial Engine Fuel Injection Nozzles - Remove
2003/05/26 New Parking Brake Assembly {4267}
AD30 Underground Articulated Truck Braking System Braking System Air - Purge
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Operator Controls
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operation Information
G3500 Engines Prelube Pump - Air
AD30 Underground Articulated Truck Machine Electrical System Idle Timer/Fire Suppression Control
AD30 Underground Articulated Truck Machine Electrical System Fuel Level
AD30 Underground Articulated Truck Machine Electrical System Backup Alarm
AD30 Underground Articulated Truck Machine Electrical System Horn
AD30 Underground Articulated Truck Machine Electrical System Hoist Control - Dump Body
Product Link 151/201 Installation Examples
Product Link 151/201 Spare Input Installation