IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Differential and Final Drive Oil Sample

Differential and Final Drive Oil Sample - Obtain

IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders [SEBU7459]

IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Cooling System Coolant Sample (Level 1) - Obtain

IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Operator Controls

POWER TRAIN

980G Wheel Loader Braking System - Test

IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Differential and Final Drive Oil Sample - Obtain

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates.

Show/hide table




Illustration 1	g00667052
Front axle

Show/hide table




Illustration 2	g00667053
Rear axle

The axles are not equipped with sampling valves. Obtaining a sample of the differential and final drive oil will require a vacuum pump or an equivalent. Withdraw the fluid through the filler opening on the right side of each axle.

Reference: Refer to Special Publication, SEBU6250, "AVSpare Machine Fluids Recommendations" for more information about obtaining a fluid sample.