C4.4 Industrial Engine Engine Oil Level - Check Caterpillar


Engine Oil Level - Check
`
C4.4 Industrial Engine [SEBU8180]
LUBRICATION SYSTEM
GAUGE GP-OIL LEVEL (DIPSTICK)
C4.4 Industrial Engine Engine Oil Level - Check

------ WARNING! ------

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.




Illustration 1g01165836
(Y) "Min" mark. (X) "Max" mark.


Illustration 2g02173847
(L) "Min" mark. (H) "Max" mark.


NOTICE

Perform this maintenance with the engine stopped.


Note: Ensure that the engine is either level or that the engine is in the normal operating position in order to obtain a true level indication.

Note: After the engine has been switched OFF, wait for 10 minutes in order to allow the engine oil to drain to the oil pan. Then, check the oil level.

  1. Maintain the oil level between the "ADD" mark (Y) and the "FULL" mark (X) on the engine oil dipstick. Or maintain the engine oil level between the H and L mark. Do not over fill the crankcase.


    NOTICE

    Operating your engine when the oil level is above the "FULL" mark could cause your crankshaft to dip into the oil. The air bubbles created from the crankshaft dipping into the oil reduces the oil's lubricating characteristics and could result in the loss of power.


  2. Remove the oil filler cap and add oil, if necessary. Clean the oil filler cap. Install the oil filler cap.

Information System:

TH62, TH63, TH82 and TH83 Telehandlers Specifications
963C Track-Type Loader Power Train Calibration Procedures
2003/04/21 A Check Valve Is Used to Eliminate the Loss of Oil When the Hydraulic Filter Is Replaced {5051, 5067}
2003/06/09 New Software Released for Machine Security System (MSS) {7620}
990 Series II Wheel Loader Machine Systems Bucket - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Engine - Remove
963C Track-Type Loader Fire Prevention and Explosion Prevention
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Install
AD30 Underground Articulated Truck Parking Brake Manual Release
AD30 Underground Articulated Truck Braking System Parking Brake (Automatic Function)
AD30 Underground Articulated Truck Circuit Breakers - Reset
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Engine - Install
3054E Industrial Engine Fuel Injection Pump - Remove
AD45 and AE40 II Underground Articulated Trucks Maintenance Interval Schedule
2003/05/05 New Hardware for the Front Engine Mounting Support is Available {1154}
TH62, TH63, TH82 and TH83 Telehandlers Operation Information
TH62, TH63, TH82 and TH83 Telehandlers Work Tools
2003/06/09 New Software Is Now Used {7620}
TH62, TH63, TH82 and TH83 Telehandlers Engine Starting
988H Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
988H Wheel Loader Cooling System Coolant Sample (Level 2) - Obtain
D6N Track-Type Tractor Power Train Bevel and Transfer Gears - Disassemble
D6N Track-Type Tractor Power Train Bevel and Transfer Gears - Assemble