TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test Caterpillar


Circuit Breakers - Test
`
TH350B, TH355B, TH360B and TH460B Telehandlers [SEBU7600]
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
TH350B, TH355B, TH360B and TH460B Telehandlers Battery Disconnect Switch - If Equipped
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test

The circuit breakers are located under the engine hood on the front right side of the engine compartment.



Illustration 1g00993080

Main Circuit Breaker (1) - The main circuit breaker is 120 amp.

Alternator Circuit Breaker (2) - The alternator circuit breaker is 105 or 135 amp.

Key Start Breaker (3) - The key start breaker is 60 amp.

Reset the circuit breaker if the breaker trips. Push in the button in order to reset the circuit. If the button does not remain depressed or the circuit breaker trips soon after being reset, check the appropriate electrical circuit. Repair the electrical circuit, if necessary.

Information System:

Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
990 Series II Wheel Loader Machine Systems Bucket - Remove
AD30 Underground Articulated Truck Reference Material
AD30 Underground Articulated Truck Hydraulic Tank Screen - Clean
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install
D6N Track-Type Tractor Power Train Brake Control Valve - Assemble
D6N Track-Type Tractor Power Train Brake Control Valve - Disassemble
973K Track-Type Loader Final Drive Oil - Change
2003/04/14 Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
525B and 535B Wheel Skidders Lifting and Tying Down the Machine
953C Track-Type Loader Engine Oil and Filter - Change
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
Installation of High Intensity Discharge Lights{1434}
Supplement for the 973C Track-Type Loader With the Steel Mill Arrangement{7000}
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Remove
AD30 Underground Articulated Truck Circuit Breakers - Reset
AD30 Underground Articulated Truck Braking System Parking Brake (Automatic Function)
AD30 Underground Articulated Truck Parking Brake Manual Release
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Install
963C Track-Type Loader Fire Prevention and Explosion Prevention
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Engine - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
990 Series II Wheel Loader Machine Systems Bucket - Install