Additional Messages
`
525B and 535B Wheel Skidders
[SEBU7480]
525B and 535B Wheel Skidders
Safety Messages
525B and 535B Wheel Skidders
Lifting and Tying Down the Machine
MACHINE ARRANGEMENT
1.1. Disconnected Battery Cables (1)
2.1. Winch Operation (2)
3.1. Cleaning Windows (3)
4.1. Engine Oil (4)
5.1. Hydraulic Oil (5)
6.1. Fuel Drain (6)
Show/hide table
 | |
| Illustration 1 | g00992675 |
Disconnected Battery Cables (1)
Show/hide table
 | |
| Illustration 2 | g00899534 |
This message is attached to the start switch after the battery cables have been disconnected or the charging system has been disconnected.
Winch Operation (2)
Show/hide table
 | |
| Illustration 3 | g00953861 |
This message is located on the top surface of the right hand console.
Note: This message is used only for machines that are equipped with a winch.
Cleaning Windows (3)
Show/hide table
 | |
| Illustration 4 | g00915794 |
This message is located on the front window and the rear window in the cab.
Engine Oil (4)
Show/hide table
 | |
| Illustration 5 | g00918038 |
This message is on the cap for the engine crankcase.
Hydraulic Oil (5)
Show/hide table
 | |
| Illustration 6 | g00917956 |
This message is located on the right side of the sight gauge on the hydraulic tank.
Fuel Drain (6)
Show/hide table
 | |
| Illustration 7 | g00953845 |
This message is located on the left side of the rear frame inside the hitch stop.
Information System:
525B and 535B Wheel Skidders
Safety Messages
924G and 924GZ Wheel Loaders Machine Systems
Main Control Valve - Assemble
924G and 924GZ Wheel Loaders Machine Systems
Main Control Valve - Disassemble
3126B Engine for Caterpillar Built Machines
System Configuration Parameters
AD30 Underground Articulated Truck
Steering System Oil Filter - Replace
AD45B Underground Articulated Truck
Oscillating Hitch - Adjust
2003/07/14
Correction to Systems Operation , "Selector and Pressure Control Valve" {3073, 3157}
AD30 Underground Articulated Truck
Tailgate Retaining Pin
C-9 Engine for the 973C Track-Type Loader
Engine Will Not Crank
Repair of Cracks in the Rear Track Roller Frame{4151}
D6N Track-Type Tractor Power Train
Priority Valve - Assemble
D6N Track-Type Tractor Power Train
Priority Valve - Disassemble
525D, 535D, 545D, 555D Wheel Skidder
Grapple Snubber - Inspect/Adjust
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073}
953C Track-Type Loader
Engine Oil Level - Check
2003/04/14
There is New Information on the Oil Grade Plug {1000, 1348}
953C Track-Type Loader
Engine Oil and Filter - Change
525B and 535B Wheel Skidders
Lifting and Tying Down the Machine
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Hydraulic and Transmission Oil Cooler - Remove
2003/04/14
Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276}
973K Track-Type Loader
Final Drive Oil - Change
D6N Track-Type Tractor Power Train
Brake Control Valve - Disassemble
D6N Track-Type Tractor Power Train
Brake Control Valve - Assemble
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Hydraulic and Transmission Oil Cooler - Install