AD30 Underground Articulated Truck Tailgate Retaining Pin Caterpillar


Tailgate Retaining Pin
`
1.1. Ejector Body

Ejector Body

------ WARNING! ------

The tailgate may move suddenly and without warning, resulting in personal injury or death.

When it is necessary to work under the tailgate with the tailgate raised, install the tailgate retaining pins through the pin bores in the tailgate and body.

----------------------



Illustration 1g01803447

  1. Pull rod (1) and remove retaining pin (2) from the stored position.



    Illustration 2g01803453

  1. Fully retract the ejector plate and raise the tailgate until the pin bore on the body aligns with the pin bore on the tailgate.

  1. Place retaining pin (2) in position as shown.

    Note: The following steps are for the removal of the retaining pin.

  1. Raise the tailgate to release any tension.

  1. Remove retaining pin (2) .

  1. Pull rod (1) and replace retaining pin (2) in the stored position. Release rod (1) to hold the retaining pin in the stored position.

Information System:

C-9 Engine for the 973C Track-Type Loader Engine Will Not Crank
Repair of Cracks in the Rear Track Roller Frame{4151}
D6N Track-Type Tractor Power Train Priority Valve - Assemble
D6N Track-Type Tractor Power Train Priority Valve - Disassemble
3126B Engine for Caterpillar Built Machines Sensors and Electrical Connectors
D6N Track-Type Tractor Power Train Final Drive, Steering Differential, and Brake (Left Side) - Install
D6N Track-Type Tractor Power Train Final Drive, Steering Differential, and Brake (Left Side) - Remove
D6N Track-Type Tractor Power Train Steering Differential and Brake - Disassemble
TH560B Telehandler Lifting Capacities
AD30 Underground Articulated Truck Service Inspection
953C Track-Type Loader Engine Oil Sample - Obtain
953C Track-Type Loader Cooling System Water Temperature Regulator - Clean/Replace
2003/07/14 Correction to Systems Operation , "Selector and Pressure Control Valve" {3073, 3157}
AD45B Underground Articulated Truck Oscillating Hitch - Adjust
AD30 Underground Articulated Truck Steering System Oil Filter - Replace
3126B Engine for Caterpillar Built Machines System Configuration Parameters
924G and 924GZ Wheel Loaders Machine Systems Main Control Valve - Disassemble
924G and 924GZ Wheel Loaders Machine Systems Main Control Valve - Assemble
525B and 535B Wheel Skidders Safety Messages
525B and 535B Wheel Skidders Additional Messages
525D, 535D, 545D, 555D Wheel Skidder Grapple Snubber - Inspect/Adjust
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073}
953C Track-Type Loader Engine Oil Level - Check
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}