EPC Parts Catalogs

AD30 Underground Articulated Truck Steering Cylinder Bearings - Lubricate Caterpillar


  1. Home
  2. Operation and Maintenance Manual
  3. #93040
Steering Cylinder Bearings - Lubricate
`
AD30 Underground Articulated Truck [SEBU7328]
AD30 Underground Articulated Truck Oscillating Hitch - Lubricate
AD30 Underground Articulated Truck Screen (Torque Converter) - Clean
STEERING SYSTEM
R2900 Load Haul Dump Tire Inflation with Nitrogen
AD30 Underground Articulated Truck Steering Cylinder Bearings - Lubricate
AD30 Underground Articulated Truck Steering System Oil Filter - Replace
AD30 Underground Articulated Truck Steering System Oil Filter - Replace

Show/hide table
------ WARNING! ------

Crushing Hazard. Ensure that the engine start switch is in the OFF position, and that the parking brake is engaged before entering the articulation area. Failure to do so could result in serious injury or death.

----------------------

Show/hide table
NOTICE

Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result.

Wipe off the fittings before any lubricant is applied.

    Show/hide table

    Illustration 1g00989502

  1. Apply lubricant through remote mounted fitting (1) for the bearing in the head end of the left steering cylinder.

  1. Apply lubricant through remote mounted fitting (2) for the bearing in the head end of the right steering cylinder.
    Show/hide table

    Illustration 2g00989506

  1. Apply lubricant through remote mounted fitting (3) for the bearing in the rod end of the right steering cylinder.

  1. Apply lubricant through remote mounted fitting (4) for the bearing in the rod end of the left steering cylinder.

Information System:

D6N Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D6N Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Safety Messages
2003/03/31 Correction to Disassembly and Assembly , "Piston Pump (Steering) - Disassemble" {4306, 5070}
651E and 657E Wheel Tractor-Scrapers Power train Power Train Troubleshooting
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3054E Industrial Engine Housing (Front) - Install
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
AD30 Underground Articulated Truck Oscillating Hitch - Lubricate
G3500B Engines Start/Stop Control
2003/03/31 Correction to Disassembly and Assembly , "Gear Pump (Axle Oil Cooler) - Remove and Install" {5073}
2003/03/31 Correction to Disassembly and Assembly , "Axle Shaft Assemblies" {3259}
AD30 Underground Articulated Truck Screen (Torque Converter) - Clean
AD30 Underground Articulated Truck Engine Air Filter Secondary Element - Replace
TH350B, TH355B, TH360B and TH460B Telehandlers Braking System - Test
2003/03/31 Correction to Disassembly and Assembly , "Bucket" {6101}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Coolant Sample (Level 1) - Obtain
963C Track-Type Loader Track - Check/Adjust
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Install
C15 On-Highway Engine Crankshaft - Remove
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Remove
C15 and C18 Generator Set Engines Connecting Rod Bearings - Install
C15 On-Highway Engine Camshaft - Install
C15 On-Highway Engine Camshaft - Remove