 |
Crushing Hazard. Ensure that the engine start switch is in the OFF position, and that the parking brake is engaged before entering the articulation area. Failure to do so could result in serious injury or death. |
 |
| NOTICE |
|---|
Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result. |
If regular lubrication is carried out at the recommended interval. The fittings for the articulating hitch bearings should only take one or two shots of grease. As many as 20 shots of grease, may be used in order to lubricate the bearings for the oscillating hitch.
Wipe off the fittings before any lubricant is applied.
 | |
| Illustration 1 | g00989499 |
- Apply lubricant through remote mounted fitting (1) for the upper hitch bearing.
- Apply lubricant through remote mounted fitting (2) for the lower hitch bearing.
- Apply lubricant through remote mounted fitting (3) for the front oscillation bearing.
 | |
| Illustration 2 | g01000113 |
Left side view of dump body machine | |
- Apply lubricant through remote mounted fitting (4) for the rear oscillation bearing.
- Apply lubricant through remote mounted fitting (5) for the front oscillation bearing.
 | |
| Illustration 3 | g01000114 |
Left side view of ejector body machine | |
- Apply lubricant through remote mounted fitting (6) for the rear oscillation bearing.