Capacities (Refill)
`
963C Track-Type Loader
[SEBU7403]
MACHINE ARRANGEMENT
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| APPROXIMATE REFILL CAPACITIES | ||||
| Compartment or System | Liters | US
Gal |
Imperial Gallon | |
| Cooling System | 32 | 8.4 | 7.0 | |
| Fuel Tank | 300 | 78 | 64.7 | |
| Engine Crankcase(1) | 26 | 6.9 | 5.7 | |
| Hydraulic System/Transmission | 140 | 36.4 | 30.2 | |
| Final Drives (Each Side) | 15 | 3.9 | 3.2 | |
| Pump Drive Gearbox | 3.8 | 1.0 | 0.83 | |
Show/hide table
| (1) | Including the oil in the oil filter |
Information System:
C7 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
TH103 Telehandler
Braking System - Test
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
Field Installation of the Programmable Hydraulic Pilot Valve Arrangements{7620}
TH103 Telehandler
Specifications
D6N Track-Type Tractor Power Train
Track Roller Frame - Install
D6N Track-Type Tractor Power Train
Track Roller Frame - Remove
D6N Track-Type Tractor Power Train
Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train
Pivot Bar-Remove and Install
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
TH62, TH63, TH82 and TH83 Telehandlers
Lifting Capacities
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Proportional Manifold (Traction Control System) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Proportional Manifold (Traction Control System) - Assemble
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Transmission - Install
613C Series II Wheel Tractor-Scraper Hydraulic System
Bowl Circuit
Installation of Direct Conversion Center Tread Idlers {4159}
613C Series II Wheel Tractor-Scraper Hydraulic System
Ejector Circuit