TH103 Telehandler Braking System - Test Caterpillar


Braking System - Test
`
TH103 Telehandler [SEBU7371]
BRAKING SYSTEM
TH103 Telehandler Braking System - Test
1.1. Service Brake Holding Ability Test
2.1. Secondary Brake Holding Ability Test

In order to conform to the ISO 3450 specifications, the brakes must be burnished before the brakes are tested.

Service Brake Holding Ability Test

------ WARNING! ------

Personal injury can result if the machine moves while testing.

If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.


Apply the service brakes in order to stop the machine. If the brakes are not stopping the machine, contact your AVSpare dealer.


NOTICE

If the machine moved while testing the brakes, contact your AVSpare dealer. Have the dealer inspect and, if necessary, repair the service brake before returning the machine to operation.


Secondary Brake Holding Ability Test

The parking brake should always hold the machine. If the parking brake is not holding the machine contact your AVSpare dealer.


NOTICE

If the machine moved while testing the brakes, contact your AVSpare dealer.

Have the dealer inspect and, if necessary, repair the parking brakes before returning the machine to operation.


Information System:

Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
Field Installation of the Programmable Hydraulic Pilot Valve Arrangements{7620}
TH103 Telehandler Specifications
D6N Track-Type Tractor Power Train Track Roller Frame - Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train Pivot Bar-Remove and Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
963C Track-Type Loader Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
TH62, TH63, TH82 and TH83 Telehandlers Lifting Capacities
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble