Specifications
`
TH103 Telehandler
[SEBU7371]
MACHINE ARRANGEMENT
Specifications are shown for basic machines without a work tool on the quick coupler.
Show/hide table
| North American Applications Only | |
|---|---|
| Approximate operating weight | |
| Overall height | |
| Overall length | |
| Overall width | |
| Wheel base | |
| Ground clearance | |
Show/hide table
| European Applications Only | |
|---|---|
| Approximate operating weight | |
| Overall height | |
| Overall length | |
| Overall width | |
| Wheel base | |
| Ground clearance | |
Information System:
D6N Track-Type Tractor Power Train
Track Roller Frame - Install
D6N Track-Type Tractor Power Train
Track Roller Frame - Remove
D6N Track-Type Tractor Power Train
Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train
Pivot Bar-Remove and Install
D6N Track-Type Tractor Power Train
Front Track Roller Frame - Install
D6N Track-Type Tractor Power Train
Front Track Roller Frame - Remove
D6N Track-Type Tractor Power Train
Equalizer Bar - Remove
D6N Track-Type Tractor Power Train
Equalizer Bar - Install
C15 Petroleum Generator Set Engines
Gear Group (Front)
C7 Engines for Caterpillar Built Machines
Unit Injector - Install
C7 Engines for Caterpillar Built Machines
Unit Injector - Remove
2003/04/21
Correction to Testing and Adjusting , "Pressure Tap Locations" {3030}
Field Installation of the Programmable Hydraulic Pilot Valve Arrangements{7620}
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
TH103 Telehandler
Braking System - Test
C7 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C7 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
963C Track-Type Loader
Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
TH62, TH63, TH82 and TH83 Telehandlers
Lifting Capacities
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Control Valve (Service) - Remove and Install