Emissions Certification Film
`
953C Track-Type Loader
[SEBU7495]
953C Track-Type Loader
Safety Messages - Arrangement 1
953C Track-Type Loader
Hydraulic System Oil - Change
MACHINE ARRANGEMENT
Note: This information is pertinent in the United States and in Canada.
Show/hide table
 | |
| Illustration 1 | g01225224 |
Type 1 | |
Type 1
The Emissions Certification Film is located on the front belt cover of the engine. This location is pertinent to newer models.
Additional Type
The Emissions Certification Film is located on the side, the top or the front of the engine. These locations are pertinent to other models.
Show/hide table
 | |
| Illustration 2 | g00795444 |
Typical Example (English) | |
Show/hide table
 | |
| Illustration 3 | g00795454 |
Typical Example (French) | |
Information System:
C7 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
953C Track-Type Loader
Engine Starting
C7 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
980G Series II Wheel Loader Electrohydraulic System
Pump Performance (Pilot and Braking) - Test
C7 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
953C Track-Type Loader
Daily Inspection
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Drive and Steering Axle (Front) - Install
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Drive and Steering Axle (Front) - Remove
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Drive and Steering Axle (Rear) - Install
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Drive and Steering Axle (Rear) - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines
Engine Oil Cooler - Inspect
938G II Wheel Loader and IT38G II Integrated Toolcarrier
Hydraulic System Oil Sample - Obtain
TH210 and TH215 Telehandlers
Lifting Capacities
D6N Track-Type Tractor Power Train
Recoil Spring - Remove
D6N Track-Type Tractor Power Train
Recoil Spring - Install
D5N Track-Type Tractor Power Train
Track Roller - Remove
D5N Track-Type Tractor Power Train
Track Roller - Install
C7 Engines for Caterpillar Built Machines
Water Temperature Regulator - Remove and Install
953C Track-Type Loader
Coolant Sample (Level 1) - Obtain
953C Track-Type Loader
Coolant Sample (Level 2) - Obtain
C7 Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C11 and C13 Engines for Caterpillar Built Machines
Variable Valve Actuators - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Relief Valve (Push-Pull) - Test and Adjust