TH210 and TH215 Telehandlers Access Doors and Covers Caterpillar


Access Doors and Covers
`
TH210 and TH215 Telehandlers [SEBU7570]
FRAME AND BODY
DOOR GP
TH210 and TH215 Telehandlers Access Doors and Covers
2.1. Protection Cover (Fuel Filler)
3.1. Access Panel for the Air Filter for the Cab
4.1. Access Cover for the Fuse Panel
5.1. Engine Enclosure

Protection Cover (Fuel Filler)




Illustration 1g00810808

The fuel filler cap (1) is located behind protection cover (2) on the left side of the cab.




Illustration 2g00914749

Use the key that is provided in order to open the protection cover.

Note: Do not fill with the wrong fluid. If the wrong fluid is used by mistake, contact your AVSpare dealer before you use the machine.

Access Panel for the Air Filter for the Cab




Illustration 3g00986755

Remove plastic covers (3) in order to remove the screws that retain access panel (4). Remove access panel (4) in order to service the air filter for the cab.

Access Cover for the Fuse Panel




Illustration 4g00986759

Location of Fuse Panel Access Cover (typical example)

Remove access panel (5) in order to gain access to the fuses.

Engine Enclosure




Illustration 5g00986762

Open engine enclosure (6) in order to gain access to the following items:

  • Engine Oil Dipstick

  • Engine Oil Filler Cap

  • Engine Oil Filter

  • Engine Air Filters

  • Fuel Filters

  • Hydraulic Oil Dipstick

  • Hydraulic Oil Filler Cap

  • Hydraulic Oil Filter

  • Cooling System Pressure Cap

  • Expansion Tank

  • Water Temperature Regulator

  • Window Washer Reservoir

Information System:

3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Fuel Tank - Install
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Install
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Fuel Tank - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Aftercooler - Install
D6N Track-Type Tractor Power Train Track - Connect - Conventional
D6N Track-Type Tractor Power Train Track - Separate - Conventional
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Aftercooler - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System Hydraulic System Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator - Install
963C Track-Type Loader Machine Systems Track
C4.4 (Mech) Industrial Engine Valve Guide - Inspect
539 Knuckleboom Loader Operation
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator and Fan Group - Remove
D6N Track-Type Tractor Power Train Final Drive - Remove
D6N Track-Type Tractor Power Train Final Drive - Install
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Rated Load
3508B Engine Radiator and Cooling System - Test
953C Track-Type Loader Safety Messages
2004/08/23 New Exhaust Tubes and Heat Shields are Now Used {1050, 1061, 1067}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Starting