Specifications
`
953C Track-Type Loader
[SEBU7495]
953C Track-Type Loader
Coolant Sample (Level 2) - Obtain
953C Track-Type Loader
Safety Messages - Arrangement 1
MACHINE ARRANGEMENT
1.1. Intended Use
2.2. Restrictions to Application and Configuration
3.3. Ripper/Scarifier Operation
Show/hide table
| 953C Track-Type Loader | |
|---|---|
| Weight | |
| Weight with bucket | |
| Length of machine | |
| Length with bucket | |
| Width with bucket | |
| Height (top of ROPS) | |
This machine is classified as a loader with wheels or tracks as described in ISO 6165:2001. This machine is manufactured with a front mounted bucket or a blade that is used for digging, loading, lifting and carrying material such as earth, crushed rock or gravel.
Restrictions to Application and Configuration
Maximum approved operating weight is
3 ripper shank assembly (standard)
The penetration (force) at the ripper is
The prying force at the ripper is
These forces vary slightly with different machine configurations.
Information System:
994D Wheel Loader Power Train
Pump Drive (Rear) - Assemble
Repair Procedure for the Upper Hitch Assembly{7057, 7100}
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Control Valve (Push-Pull)
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Cushion-Hitch Circuit
3044C Industrial Engine and Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
980G Wheel Loader Power Train
Transmission Planetary - Assemble - Standard
TH220B, TH330B and TH340B Telehandlers
Boom Wear Pad Clearance - Inspect/Adjust
980G Wheel Loader Power Train
Transmission Planetary - Disassemble - Standard
2003/03/24
A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission - Assemble
D11R Track-Type Tractor
Operation Information
D6N Track-Type Tractor Machine Systems
Rollover Protective Structure (ROPS) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Steering Wheel - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines
Piston and Rings
2003/06/16
A New Accumulator Is Now Used {1805, 1808, 7320}
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Steering Cylinder - Remove and Install
953C Track-Type Loader
Safety Messages - Arrangement 1
2003/03/31
Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Accumulator - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Accumulator Charging Valve (Brake) - Remove and Install
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Operational Checks
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove