D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Power Angling Tilt Hinge Pins - Lubricate Caterpillar

Illustration 1	g00531999

Apply lubricant to the grease fitting for the rod end of the tilt cylinder (1) .

Apply lubricant to the grease fitting for the head end of the tilt cylinder (2) .

Illustration 2	g00111735

Apply lubricant to the grease fitting for the rod end of the lift cylinder (3) .

Apply lubricant to the grease fitting for the head end of the lift cylinder (4) .

Apply lubricant to the grease fittings for the other lift cylinder.

Apply lubricant to the grease fitting for the rod end of the angle cylinder (5) .

Apply lubricant to the grease fitting for the head end of the angle cylinder (6) .

Apply lubricant to the grease fittings for the other angle cylinder.

Illustration 3	g00111737

Apply lubricant to the remote grease fitting (7) for the pivot of the C-frame. There is a remote grease fitting on each side of the machine.

Illustration 4	g00531803

Apply lubricant to the grease fittings for the top link (8) .

There is a total of 16 grease fittings.