| |
| Illustration 1 | g00100498 |
|
FLOAT (1) - Push the control lever forward into the detent. The bucket will move with the contour of the ground. |
The control lever will remain in the FLOAT position until the control lever is pulled out of the detent. The control lever will return to the HOLD position when the control lever is released.
| NOTICE |
|---|
|
Never use the FLOAT position to lower a loaded bucket. Machine damage can result from a bucket that falls too fast. |
|
LOWER (2) - Push the control lever forward in order to lower the bucket. The control lever will return to the HOLD position when the control lever is released. |
|
HOLD (3) - The control lever will return to the HOLD position when the control lever is released from the RAISE position or from the LOWER position. The bucket will remain in the selected position. |
|
RAISE (4) - Pull the control lever backward in order to raise the bucket. Release the control lever in order to stop raising the bucket. The control lever will return to the HOLD position when the control lever is released. |
The control lever is detented in the fully raised position. The control lever will stay in the detent and the bucket will continue to rise until the bucket reaches the lift kickout height. Then, the control lever will return to the HOLD position.