966G and 972G Wheel Loaders Seat Caterpillar


Seat
`

Note: The operator's seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.

Adjust the seat in order to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat.



Illustration 1g00595192

Seat Cushion Angle (1) - Pull the lever upward. Hold the lever upward and move the seat cushion to the desired angle. Release the lever in order to lock the seat cushion into position. The seat cushion can be adjusted to one of three positions.

Fore and Aft Position (2) - Pull the lever upward. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position.

Backrest Cushion Angle (3) - Pull the lever upward. Hold the lever upward and adjust the backrest cushion to the desired angle. Release the lever in order to lock the backrest cushion into position.

Seat Height (4) - Pull the lever upward. Hold the lever upward and move the seat to the desired height. Release the lever in order to lock the seat into position.



Illustration 2g00595196

Lumbar Support (5) - Push the lever backward in order to increase support to the lower back. Pull the lever forward in order to decrease support to the lower back. Release the lever in order to lock the seat into position.



Illustration 3g00595197

Pull up on the backrest in order to remove extension (6).

Rotate knob (7) in order to adjust the angle of the armrest in the operating position.

Information System:

3306B Industrial Engine Severe Service Application - Check
3500B Engines for Caterpillar Built Power Modules Balancer Group (Front)
966G and 972G Wheel Loaders Heating and Air Conditioning Control
D9R Track-Type Tractor Lubricant Information
D6M Track-Type Tractor Bulldozer Blade Tip
3500B Engines for Caterpillar Built Power Modules Housing (Front)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Seat
966G and 972G Wheel Loaders Window Wiper and Washer Control
3500B Engines for Caterpillar Built Power Modules Crankshaft Wear Sleeves and Seals
966G and 972G Wheel Loaders Light Switches
980G Wheel Loader Warning Categories (Caterpillar Monitoring System)
980G Wheel Loader Battery Disconnect Switch
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
G3304 and G3306 Engines Belt Tension Chart
3406C Engines for Caterpillar Built Machines Electric Starting Motor
992G Wheel Loader Electrohydraulic System Electrohydraulic Control
3126E and 3126B Commercial and Truck Engines Electrical System
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Control Support
3408E and 3412E Engines for Caterpillar Built Machines Coolant Flow Switch
992G Wheel Loader and 854G Wheel Dozer Steering System Filters (Steering)
824G , 825G and 826G Landfill Compactor Autoshift Control
3500B Engines for Caterpillar Built Power Modules Engine Oil Pump
992G Wheel Loader and 854G Wheel Dozer Steering System Secondary Steering System - If Equipped
992G Wheel Loader and 854G Wheel Dozer Power Train General Information