D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Level - Check Caterpillar


Cooling System Level - Check
`

------ WARNING! ------

Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.

----------------------



Illustration 1g00110411

Open the access panel on the top of the engine compartment.




    Illustration 2g00110412

  1. The cooling system pressure cap is located on the top of the radiator on the left side of the machine. Remove the cooling system pressure cap slowly in order to relieve system pressure.



    Illustration 3g00110413

  1. Maintain the coolant level to the bottom of the tab in the filler tube. If you need to add coolant daily, check the cooling system for leaks.

  1. Inspect the seal for the cooling system pressure cap. Replace the seal if the seal is damaged.

  1. Install the cooling system pressure cap. Close the access panel.

Information System:

D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant Additive (DEAC) - Add
D6M Track-Type Tractor Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant (DEAC) - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Changing Direction and Speed
TH62, TH63, TH82 and TH83 Telehandlers Engine Valve Lash - Check
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Walk-Around Inspection
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Towing the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fire Prevention and Explosion Prevention
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Dozing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Tilt and Angle Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Lift Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Braking System - Test
992G Wheel Loader and 854G Wheel Dozer Steering System General Information (Steering)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting Above 0°C (32°F)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Jump Start Cables
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Oil and Filter - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fuel System Primary Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Starting with Auxiliary Start Receptacle
992G Wheel Loader and 854G Wheel Dozer Power Train Axle Oil Cooler
3500B Engines for Caterpillar Built Power Modules Fuel Transfer Pump
3508B Engine for Caterpillar Built Machines Fuel Injector Mechanism
D11R Track-Type Tractor After Starting Engine
3500B Engines for Caterpillar Built Power Modules Fuel Injector
3500B Engines for Caterpillar Built Power Modules Valve Mechanism