Sampling Interval and Location of Sampling Valve
`
D6M Track-Type Tractor
[SEBU6894]
MACHINE ARRANGEMENT
MISCELLANEOUS INFORMATION
Show/hide table
| Compartment | Recommended Oil Change Interval | Recommended Sampling Interval | Sampling Valve | Oil Type |
| Engine | 250 Hours | 250 Hours | Yes | DEO |
| Transmission | 1000 Hours | 250 Hours | Yes | TDTO |
| Hydraulics | 2000 Hours | 250 Hours | No | HYDO |
| Final Drive | 2000 Hours | 250 Hours | No | TDTO |
Obtain the oil samples as close as possible to the standard intervals. In order to receive the full effect of S·O·S oil analysis, you must establish a consistent trend of data. In order to establish a pertinent history of data, perform consistent samplings that are evenly spaced.
Show/hide table
 | |
| Illustration 1 | g00101455 |
The sampling valve for the engine is located under the crankcase guard. | |
Show/hide table
 | |
| Illustration 2 | g00101456 |
The sampling valve for the transmission oil is below the transmission. | |
Consult your AVSpare dealer for complete information and for assistance about the S·O·S oil analysis program.
Information System:
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Cooling System Coolant (DEAC) - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Changing Direction and Speed
TH62, TH63, TH82 and TH83 Telehandlers
Engine Valve Lash - Check
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Walk-Around Inspection
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Towing the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Fire Prevention and Explosion Prevention
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Dozing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Bulldozer Blade Tilt and Angle Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Bulldozer Blade Lift Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Braking System - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Air Conditioner - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Heating and Air Conditioning Control - If Equipped
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Cooling System Coolant Additive (DEAC) - Add
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Cooling System Level - Check
992G Wheel Loader and 854G Wheel Dozer Steering System
General Information (Steering)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Starting Above 0°C (32°F)
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Starting with Jump Start Cables
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Oil and Filter - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Fuel System Primary Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Starting with Auxiliary Start Receptacle
992G Wheel Loader and 854G Wheel Dozer Power Train
Axle Oil Cooler
3500B Engines for Caterpillar Built Power Modules
Fuel Transfer Pump
3508B Engine for Caterpillar Built Machines
Fuel Injector Mechanism
D11R Track-Type Tractor
After Starting Engine