D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Lift Control Caterpillar


Bulldozer Blade Lift Control
`
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors [SEBU7077]
OPERATOR STATION
CONTROL GP-HYDRAULIC
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Lift Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Tilt and Angle Control



Illustration 1g00110259


FLOAT (1) - Completely push the lever forward into the detent. This will move the bulldozer blade into the FLOAT position. In the FLOAT position, the blade moves up and down with the ground contour.

The lever will remain in the FLOAT detent until you manually pull the lever out of the detent position. The lever then returns to HOLD position.


LOWER (2) - Push the lever forward in order to lower the blade. Release the lever. The lever will return to the HOLD position.


HOLD (3) - The lever will return to the HOLD position, when you release the lever from the RAISE position and from the LOWER position.


RAISE (4) - Pull back on the lever in order to raise the blade. Release the lever. The lever will return to the HOLD position.

Information System:

D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Braking System - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Air Conditioner - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Heating and Air Conditioning Control - If Equipped
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Warning Signs and Labels
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Track Adjustment - Adjust
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Shipping the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Ripping
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Lubricant Viscosities
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Product Identification Number, Serial Number and EU's CE Plate Locations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Model View Illustrations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Lifting and Tying Down the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Bulldozer Blade Tilt and Angle Control
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Dozing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fire Prevention and Explosion Prevention
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Towing the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Walk-Around Inspection
TH62, TH63, TH82 and TH83 Telehandlers Engine Valve Lash - Check
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Changing Direction and Speed
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant (DEAC) - Change
D6M Track-Type Tractor Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Coolant Additive (DEAC) - Add
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cooling System Level - Check
992G Wheel Loader and 854G Wheel Dozer Steering System General Information (Steering)