Lifting and Tying Down the Machine
`
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
[SEBU7077]
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Land Clearing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Model View Illustrations
MACHINE ARRANGEMENT
Show/hide table
 | |
| Illustration 1 | g00110277 |
Show/hide table
| NOTICE |
|---|
Improper lifting or tiedowns can allow load to shift and cause injury or damage. |
- The weights that are listed below and the instructions that are listed below describe units that are manufactured by AVSpare Inc..
Show/hide table
Table 1 MACHINE WEIGHTS D3C Series III Hystat Standard
9216 kg (20318 lb)LGP
9653 kg (21282 lb)XL
9408 kg (20741 lb)D4C Series III Hystat Standard
9453 kg (20840 lb)LGP
9903 kg (21832 lb)XL
9635 kg (21242 lb)D5C Series III Hystat Standard
10274 kg (22650 lb)LGP
10775 kg (23756 lb)XL
10478 kg (23100 lb)
- The parking brake must be engaged before you sling the machine. Engage the parking brake before you secure the machine with tie-downs.
- Use properly rated cables and properly rated slings for lifting. For a machine without a ripper, position the slings beneath the front of the track and beneath the rear of the track. For a machine with a ripper, position the slings beneath the front of the track and under the ripper at the rear of the machine.
- On sharp corners, use corner protectors. The crane should be positioned so that the machine may be lifted in a level plane. The spreader bars should be wide enough to prevent contact with the machine.
- Tie-downs:
- Front tie-down: Use the eye of the front tie-down.
- Side tie-downs: Use the inside edge of the track shoe.
- Rear tie-downs: Use the drawbar, the ripper, or the outer edge of the track shoe.
Check the state laws that govern the following load characteristics.
- Weight
- Width
- Length
- Height
Check the local laws that govern the following load characteristics.
- Weight
- Width
- Length
- Height
Consult your AVSpare dealer for shipping instructions for your machine.
- Front tie-down: Use the eye of the front tie-down.
Information System:
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Land Clearing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Hydraulic System Oil Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Hydraulic System Oil - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Gauges
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Fuses - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Start Switch
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Air Filter Secondary Element - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Cab Air Filter - Clean/Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier
Capacities (Refill)
3408C, 3412, 3412C, and 3412D High Performance Marine Engines
Engine Air Cleaner Service Indicator - Inspect
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Model View Illustrations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Product Identification Number, Serial Number and EU's CE Plate Locations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Lubricant Viscosities
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Ripping
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Shipping the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Track Adjustment - Adjust
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Warning Signs and Labels
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Heating and Air Conditioning Control - If Equipped
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Air Conditioner - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Braking System - Test
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Bulldozer Blade Lift Control