Engine Start Switch
`
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
[SEBU7077]
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Air Filter Secondary Element - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Fuses - Replace
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Battery Disconnect Switch
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Start Switch
Show/hide table
 | |
| Illustration 1 | g00110268 |
Show/hide table
| OFF (1) - Insert the engine start switch key only from the OFF position and remove the engine start switch key only from the OFF position. In the OFF position, there is no power to most electrical circuits in the cab. |
Turn the engine start switch key to the OFF position in order to stop the engine.
Show/hide table
| ON (2) - Turn the engine start switch key clockwise to the ON position in order to activate all of the cab circuits. |
Show/hide table
| START (3) - Turn the engine start switch key clockwise to the START position in order to crank the engine. Release the engine start switch key after the engine starts and the engine start switch key returns to the ON position. |
Note: If the engine fails to start, the engine start switch key must be returned to the OFF position in order to attempt to start the engine again.
Information System:
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Engine Air Filter Secondary Element - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Cab Air Filter - Clean/Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier
Capacities (Refill)
3408C, 3412, 3412C, and 3412D High Performance Marine Engines
Engine Air Cleaner Service Indicator - Inspect
966G and 972G Wheel Loaders
Payload Control System (PCS) - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier
Traction Control System (TCS) - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier
Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Radiator Core - Clean
631E Series II Wheel Tractor-Scrapers
Fire Prevention and Explosion Prevention
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Fuses - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Gauges
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Hydraulic System Oil - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Hydraulic System Oil Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Land Clearing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Lifting and Tying Down the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Model View Illustrations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Product Identification Number, Serial Number and EU's CE Plate Locations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Lubricant Viscosities
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Ripping
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Sampling Interval and Location of Sampling Valve
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors
Shipping the Machine