D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cab Air Filter - Clean/Replace Caterpillar


Cab Air Filter - Clean/Replace
`
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors [SEBU7077]
OPERATOR STATION
CAB GP
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cab Air Filter - Clean/Replace

Note: Clean the filter elements more often in dusty conditions. If there is a noticeable reduction in the airflow from the air vents, check the filter elements.




    Illustration 1g00110197

  1. Open the filter cover. The filter cover is located on the right side of the machine.



    Illustration 2g00110198

  1. Remove the filter element. Clean the filter element with compressed air. You can also wash the filter element with a solution of warm water and of a nonsudsing household detergent.

    Do not wash the filter elements while the filter elements are installed on the machine.

  1. Rinse the filter element in clean water. Air dry the filter element thoroughly.

  1. Install the filter element and close the filter cover.



    Illustration 3g00110199

  1. Remove the filter cover and the filter element. The filter element is located under the bulldozer blade control lever.

  1. Clean the filter element with compressed air. You can also wash the filter element with a solution of warm water and of a nonsudsing household detergent.

  1. Rinse the filter element in clean water. Air dry the filter element thoroughly.

  1. Replace any filter elements that are worn or damaged.

  1. Face the seal toward the filter cover when you install the filter element.

Information System:

D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier Capacities (Refill)
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Air Cleaner Service Indicator - Inspect
966G and 972G Wheel Loaders Payload Control System (PCS) - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier Traction Control System (TCS) - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Radiator Core - Clean
631E Series II Wheel Tractor-Scrapers Fire Prevention and Explosion Prevention
D11R Track-Type Tractor Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Level - Check
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Air Filter Secondary Element - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Start Switch
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Fuses - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Gauges
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Hydraulic System Oil - Change
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Hydraulic System Oil Filter - Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Land Clearing
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Lifting and Tying Down the Machine
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Model View Illustrations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Product Identification Number, Serial Number and EU's CE Plate Locations
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Lubricant Viscosities
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Ripping