D11R Track-Type Tractor Engine Oil Level - Check Caterpillar


Engine Oil Level - Check
`
D11R Track-Type Tractor [SEBU7022]
BASIC ENGINE
PAN GP-OIL
D11R Track-Type Tractor Engine Oil Level - Check
D11R Track-Type Tractor Engine Oil Sample - Obtain

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.

----------------------


NOTICE

Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.





    Illustration 1g00457400

  1. Open the access door on the left side of the machine.



    Illustration 2g00106997



    Illustration 3g00575437

  1. Check the "ENGINE RUNNING" side of the dipstick (2) while the engine is running. Maintain the oil level between the "ADD" mark and the "FULL" mark.

    Check the "ENGINE STOPPED" side of dipstick (2) while the engine is stopped. Maintain the oil level between the "LOW" mark and the "FULL" mark.

    Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the "FULL" mark on the "ENGINE STOPPED" side of the dipstick.

  1. Remove oil filler cap (1). If necessary, add oil.

  1. Clean the oil filler cap and install the oil filler cap.

  1. Close the access door.

Information System:

938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Water and Sediment - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Cap and Strainer - Clean
631E Series II Wheel Tractor-Scrapers Seat Belt (Retractable)
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) Element - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier Fuses - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil and Filter - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil Level - Check
631E Series II Wheel Tractor-Scrapers Fire Prevention and Explosion Prevention
938G Wheel Loader and IT38G Integrated Toolcarrier Radiator Core - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Traction Control System (TCS) - If Equipped
966G and 972G Wheel Loaders Payload Control System (PCS) - If Equipped
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Air Cleaner Service Indicator - Inspect
938G Wheel Loader and IT38G Integrated Toolcarrier Capacities (Refill)
938G Wheel Loader and IT38G Integrated Toolcarrier Alert Indicators
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Battery Disconnect Switch
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Cab Air Filter - Clean/Replace
D3C Series III, D4C Series III and D5C Series III HYSTAT Track-Type Tractors Engine Air Filter Secondary Element - Replace