938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Water and Sediment - Drain Caterpillar


Fuel Tank Water and Sediment - Drain
`
938G Wheel Loader and IT38G Integrated Toolcarrier [SEBU7037]
FUEL SYSTEM
TANK GP-FUEL
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Cap and Strainer - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Water and Sediment - Drain


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on AVSpare products.

Dispose of all fluids according to local regulations and mandates.


Note: If the water separator bowl is full on a daily basis, drain the fuel tank on a daily basis.



Illustration 1g00278640

The fuel tank drain valve is located at the rear of the machine underneath the machine.



Illustration 2g00581536

Slowly remove the fuel tank cap in order to relieve pressure.



Illustration 3g00110456

Open the fuel tank drain valve. Allow the water and sediment to drain into a suitable container.

Close the fuel tank drain valve.

Information System:

938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Cap and Strainer - Clean
631E Series II Wheel Tractor-Scrapers Seat Belt (Retractable)
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) Element - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier Fuses - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil and Filter - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Governor Oil Supply Screen - Clean/Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Differential and Final Drive Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Cooling System Coolant Extender (ELC) - Add
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Level - Check
D11R Track-Type Tractor Engine Oil Level - Check
631E Series II Wheel Tractor-Scrapers Fire Prevention and Explosion Prevention
938G Wheel Loader and IT38G Integrated Toolcarrier Radiator Core - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Traction Control System (TCS) - If Equipped
966G and 972G Wheel Loaders Payload Control System (PCS) - If Equipped
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Air Cleaner Service Indicator - Inspect
938G Wheel Loader and IT38G Integrated Toolcarrier Capacities (Refill)