938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Cap and Strainer - Clean Caterpillar


Fuel Tank Cap and Strainer - Clean
`


Illustration 1g00110544

The fuel cap is located at the rear of the machine.



    Illustration 2g00278639


    Illustration 3g00100213

  1. Open the engine access door on the right side of the engine. Lift the lever (5) and turn the lever (5) counterclockwise until the lever stops. Remove the cap.

  2. Inspect seal (4) for damage. Replace the seal, if necessary.

  3. Remove screws (1), filter assembly (2), drain valve (3) and the gaskets.

  4. Remove the strainer that is located in the filler opening.

  5. Wash the strainer and the fuel tank cap in a clean, nonflammable solvent.

  6. Install a new cap filter kit. Install the gaskets, drain valve (3), filter assembly (2), and screws (1).

  7. Install the strainer into the filler opening.

  8. Install the fuel tank cap. Close the engine access door.

Information System:

631E Series II Wheel Tractor-Scrapers Seat Belt (Retractable)
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) Element - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System Primary Filter (Water Separator) - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier Fuses - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil and Filter - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Governor Oil Supply Screen - Clean/Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Differential and Final Drive Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Cooling System Coolant Extender (ELC) - Add
938G Wheel Loader and IT38G Integrated Toolcarrier Cooling System Coolant (ELC) - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Fuel Tank Water and Sediment - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Oil Level - Check
D11R Track-Type Tractor Engine Oil Level - Check
631E Series II Wheel Tractor-Scrapers Fire Prevention and Explosion Prevention
938G Wheel Loader and IT38G Integrated Toolcarrier Radiator Core - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier Traction Control System (TCS) - If Equipped
966G and 972G Wheel Loaders Payload Control System (PCS) - If Equipped
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Air Cleaner Service Indicator - Inspect