Fuel System Primary Filter (Water Separator) - Drain
`
938G Wheel Loader and IT38G Integrated Toolcarrier
[SEBU7037]
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Primary Filter (Water Separator) Element - Replace
FUEL SYSTEM
FILTER GP-FUEL
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Primary Filter (Water Separator) - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Primary Filter (Water Separator) Element - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Secondary Filter Number One - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Secondary Filter Number Two - Replace
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g00110548 |
The water separator is located in the engine compartment on the right side of the machine.
- Open the engine hood.
Show/hide table
Illustration 2 g00922021 - Loosen the drain valve on the bottom of the water separator element. Allow the water and the sediment to drain into a suitable container.
- Tighten the drain valve.
Note: The water separator is under suction during normal engine operation. Tighten the drain valve in order to prevent air leakage into the fuel system.
- If the engine fails to start, change the fuel filter. If there is a power loss, change the fuel filter.
- Close the engine hood.
Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System - Prime
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuses - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Oil and Filter - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant Extender (ELC) - Add
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant (ELC) - Change
631E Series II Wheel Tractor-Scrapers
General Hazard Information
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Air Filter Secondary Element - Replace
992G Wheel Loader Electrohydraulic System
Implement Electronic Control Pinout Specifications
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel System Primary Filter (Water Separator) Element - Replace
631E Series II Wheel Tractor-Scrapers
Seat Belt (Retractable)
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel Tank Cap and Strainer - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier
Fuel Tank Water and Sediment - Drain
938G Wheel Loader and IT38G Integrated Toolcarrier
Hydraulic System Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Hydraulic System Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Hydraulic System Oil Level - Check
D11R Track-Type Tractor
Engine Oil Level - Check
631E Series II Wheel Tractor-Scrapers
Fire Prevention and Explosion Prevention
938G Wheel Loader and IT38G Integrated Toolcarrier
Radiator Core - Clean
938G Wheel Loader and IT38G Integrated Toolcarrier
Transmission Oil Filter - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Transmission Oil - Change