Refill Capacities
`
D7R Track-Type Tractor
[SEBU6896]
MACHINE ARRANGEMENT
Show/hide table
| APPROXIMATE REFILL CAPACITIES | |||
|---|---|---|---|
| Compartment or System | Liters | US gal | Imperial gallon |
| Cooling System | |
|
|
| Fuel Tank | |
|
|
| Engine Crankcase and Filter | |
|
|
| Power Train Oil System | |
|
|
| Hydraulic Tank Oil | |
|
12.1 Imp gal |
| Final Drives | |
|
|
| Recoil Spring Compartment | |
|
|
| Pivot Shaft (STD undercarriage) | |
|
|
| Pivot Shaft (LGP undercarriage) | |
|
|
Note: When you are operating on severe slopes, the quantity of oil in the power train can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high-power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.
Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Water Temperature Regulator - Replace
D7R Track-Type Tractor
Braking System - Test
IT28G Integrated Toolcarrier and 928G Wheel Loader
Axle Housing and Bearing Preload Adjustment
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Capacities (Refill)
D7R Track-Type Tractor
Sound Information and Vibration Information
IT28G Integrated Toolcarrier and 928G Wheel Loader
Limited Slip Differential
IT28G Integrated Toolcarrier and 928G Wheel Loader
Differential Backlash and Bearing Adjustment
992G Wheel Loader and 854G Wheel Dozer Power Train
Transmission Planetary
IT28G Integrated Toolcarrier and 928G Wheel Loader
Differential Pinion Preload Adjustment
D7R Track-Type Tractor
Model View Illustrations
IT28G Integrated Toolcarrier and 928G Wheel Loader
Brake and Planetary
D7R Track-Type Tractor
Lifting and Tying Down the Machine
D7R Track-Type Tractor
Machine Operation Information
Installation of Retractable Seat Belt{7327}
938G Wheel Loader and IT38G Integrated Toolcarrier
Plate Locations and Film Locations
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery Disconnect Switch
992G Wheel Loader Electrohydraulic System
Implement Electronic Control Pinout Specifications
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Air Filter Secondary Element - Replace
631E Series II Wheel Tractor-Scrapers
General Hazard Information
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant (ELC) - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant Extender (ELC) - Add
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Differential and Final Drive Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Governor Oil Supply Screen - Clean/Inspect/Replace