EPC Parts Catalogs

D7R Track-Type Tractor Lifting and Tying Down the Machine Caterpillar


  1. Home
  2. Operation and Maintenance Manual
  3. #56816
Lifting and Tying Down the Machine
`
D7R Track-Type Tractor [SEBU6896]
D7R Track-Type Tractor Hydraulic System Oil Level - Check
D7R Track-Type Tractor Transmission Oil - Change
MACHINE ARRANGEMENT
D6R Track-Type Tractor Shipping the Machine
561M Pipelayer Engine Starting with Jump Start Cables
D6R Track-Type Tractor Ripping
3208 Marine Engine English (SAE) Fasteners
3208 Marine Engine Standard Torque for Worm Drive Band Hose Clamps
3208 Marine Engine Metric (ISO) Fasteners
Show/hide table

Illustration 1g00040000

Show/hide table
NOTICE

Improper lifting or tiedowns can allow load to shift and can cause injury and damage.

  1. The weights that are listed below and the instructions that are listed below describe the units that are manufactured by AVSpare Inc.

    Approximate Machine Shipping Weights are listed below:

    Show/hide table
    Table 1
    D7R Track-Type Tractor    
    Weight without Implements    
    20500 kg (45300 lb)    
    Weight with 7SU Bulldozer    
    24100 kg (53200 lb)    
    Weight with 7SU Bulldozer and Ripper    
    27150 kg (60000 lb)    

    Show/hide table
    Table 2
    D7R LGP Track-Type Tractor    
    Weight without Implements    
    22500 kg (49600 lb)    
    Weight with 7S Bulldozer    
    25950 kg (52250 lb)    

    Show/hide table
    Table 3
    D7R XR Track-Type Tractor    
    Weight without Implements    
    20500 kg (45300 lb)    
    Weight with 7SU Bulldozer    
    24100 kg (53200 lb)    
    Weight with 7SU Bulldozer and Ripper    
    27150 kg (60000 lb)    

    Note: Significant deviations can affect shipping the machine, or significant deviations can affect lifting the machine. Some examples of these deviations are listed below:

    • Different implements

    • Additional fuel

    • Wider track shoes

    • Tracks with accumulated mud

  1. Engage the parking brake before you sling the machine. Engage the parking brake before you secure the machine with tie-downs.

  1. Use properly rated cables and properly rated slings for lifting. For a machine without a ripper, position the slings beneath the front of the track and beneath the rear of the track. For a machine with a ripper, position the slings beneath the front of the track and under the ripper at the rear of the machine.

  1. On sharp corners, use corner protectors. The crane should be positioned so that the machine may be lifted in a level plane. The spreader bars should be wide enough to prevent contact with the machine.

  1. Tie down locations are listed below:

    • Use the eye of the front tie-down in order to tie down the front of the machine.

    • Use the inside edge of the track shoe in order to tie down the sides of the machine.

    • Use the drawbar, the ripper, or the outer edge of the track shoe in order to tie down the rear of the machine.

    Check the state laws and the local laws that govern the following load characteristics.

    • Weight

    • Width

    • Length

    • Height

    Consult your AVSpare dealer for shipping instructions for your machine.

Information System:

D7R Track-Type Tractor Refill Capacities
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Hydraulic Control
D7R Track-Type Tractor Model View Illustrations
D7R Track-Type Tractor Hydraulic System Oil Level - Check
992G Wheel Loader and 854G Wheel Dozer Power Train Oil Filter (Power Train)
D7R Track-Type Tractor Hydraulic System Oil Filter - Replace
D7R Track-Type Tractor Hydraulic System Oil - Change
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System Testing and Adjusting
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Case
D7R Track-Type Tractor Walk-Around Inspection
D7R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
992G Wheel Loader and 854G Wheel Dozer Power Train Selector and Pressure Control Valve (Transmission)
D7R Track-Type Tractor Transmission Oil - Change
D7R Track-Type Tractor Transmission Oil Filter - Replace
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Clutch Running Clearance
D7R Track-Type Tractor Starting Below 0°C (32°F) with Ether Starting Aid
IT28G Integrated Toolcarrier and 928G Wheel Loader Axle (Oscillating)
Installing Maintenance Free Linkage Seals{6107}
D7R Track-Type Tractor Lifting and Tying Down the Machine
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Planetary
D7R Track-Type Tractor Model View Illustrations
IT28G Integrated Toolcarrier and 928G Wheel Loader Differential Pinion Preload Adjustment
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Planetary