D7R Track-Type Tractor Refill Capacities Caterpillar


Refill Capacities
`

Table 1
APPROXIMATE REFILL CAPACITIES    
Compartment or System     Liters     US gal     Imperial gallon    
Cooling System     75     19.8     16.5    
Fuel Tank     479     126.5     105.4    
Engine Crankcase and Filter     27.3     7.2     6    
Power Train Oil System     182     48.1     40    
Hydraulic Tank Oil     54.1     14.3     12.1    
Final Drives     13     3.4     2.9    
Recoil Spring Compartment     25     6.5     5.5    

Note: When you are operating on severe slopes, the quantity of oil in the power train can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.

Information System:

992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Hydraulic Control
D7R Track-Type Tractor Model View Illustrations
D7R Track-Type Tractor Hydraulic System Oil Level - Check
992G Wheel Loader and 854G Wheel Dozer Power Train Oil Filter (Power Train)
D7R Track-Type Tractor Hydraulic System Oil Filter - Replace
D7R Track-Type Tractor Hydraulic System Oil - Change
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System Testing and Adjusting
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Case
D7R Track-Type Tractor Walk-Around Inspection
D7R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System System Operation
D7R Track-Type Tractor Lifting and Tying Down the Machine
992G Wheel Loader and 854G Wheel Dozer Power Train Selector and Pressure Control Valve (Transmission)
D7R Track-Type Tractor Transmission Oil - Change
D7R Track-Type Tractor Transmission Oil Filter - Replace
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Clutch Running Clearance
D7R Track-Type Tractor Starting Below 0°C (32°F) with Ether Starting Aid
IT28G Integrated Toolcarrier and 928G Wheel Loader Axle (Oscillating)
Installing Maintenance Free Linkage Seals{6107}
D7R Track-Type Tractor Lifting and Tying Down the Machine
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Planetary
D7R Track-Type Tractor Model View Illustrations
IT28G Integrated Toolcarrier and 928G Wheel Loader Differential Pinion Preload Adjustment