D6R Track-Type Tractor Refill Capacities Caterpillar


Refill Capacities
`

Table 1
APPROXIMATE REFILL CAPACITIES    
Compartment or System     Liters     US gal     Imperial gallon    
Cooling System     (74)     (19.5)     (16.2)    
Fuel Tank     (383)     (101)     (84.3)    
Engine Crankcase and Filter     (27.5)     (7.3)     (6)    
Power Train Oil System     (148)     (38.5)     (32.6)    
Hydraulic Tank Oil     (47.3)     (12.5)     (10.4)    
Final Drives     (13.5)     (3.6)     (3)    
Recoil Spring Compartment     (25)     (6.5)     (5.5)    
Pivot Shaft     (5)     (1.3)     (1.1)    

Note: When you are operating on severe slopes, the quantity of oil in the power train can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.

Information System:

IT28G Integrated Toolcarrier and 928G Wheel Loader Clutch (Forward High and Forward Low)
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Bucket Control Group
D6R Track-Type Tractor Steering and Directional Lever
D6R Track-Type Tractor Starting Below 0°C (32°F) with Ether Starting Aid
D6R Track-Type Tractor Starting Above 0°C (32°F)
D6R Track-Type Tractor Machine Operation Information
D6R Track-Type Tractor Light Switches
D6R Track-Type Tractor Lifting and Tying Down the Machine
D6R Track-Type Tractor Heating and Air Conditioning Controls
D6R Track-Type Tractor Gauges
561M Pipelayer Towing the Machine
C15 and C18 Petroleum Generator Sets Engine Operation - Hydrocarbon Mitigation
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Hydraulic System
IT28G Integrated Toolcarrier and 928G Wheel Loader Clutch (Reverse and Second)
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Lubrication
3208 Marine Engine Docking or Reversing Travel Direction
3208 Marine Engine After Stopping Engine
IT28G Integrated Toolcarrier and 928G Wheel Loader Clutch (First and Third)
651E Wheel Tractor-Scraper Cooling System Water Temperature Regulator - Replace
966G and 972G Wheel Loaders Multipurpose Bucket Operation
992G Wheel Loader and 854G Wheel Dozer Power Train Input Transfer Gear And Output Transfer Gear Lubrication
631E Series II Wheel Tractor-Scrapers Engine Valve Lash - Check
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System Specification