D6R Track-Type Tractor Engine Oil Level - Check Caterpillar


Engine Oil Level - Check
`

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.

----------------------


NOTICE

Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.


  1. The level gauge relies on gravity. The machine must be on a level surface for an accurate check.

  1. Open the access cover that is on the left side of the machine.



    Illustration 1g00103739

  1. Check the "SAFE OPERATING RANGE" side of the dipstick (1) while the engine is running and the oil is at operating temperature. Maintain the oil level in the crosshatch on the dipstick.

    Check the "SAFE STARTING RANGE" side of dipstick (1) while the engine is stopped. The oil should be cold. Maintain the oil level in the crosshatch on the dipstick.

    Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the top end of the "SAFE STARTING RANGE" side of the dipstick.

  1. Remove oil filler cap (2). If necessary, add oil.

  1. Clean the oil filler cap and install the oil filler cap.

  1. Close the access cover.