631E Series II Wheel Tractor-Scrapers Tire Inflation with Nitrogen Caterpillar

Tire Inflation with Nitrogen

AVSpare recommends the use of dry nitrogen gas for tire inflation and for tire pressure adjustments. This includes all machines with rubber tires. Nitrogen is an inert gas that will not aid combustion inside the tire.

------ WARNING! ------

Proper nitrogen inflation equipment, and training in using the equipment, are necessary to avoid over inflation. A tire blowout or rim failure can result from improper or misused equipment and personal injury or death can occur.

A tire blowout and/or rim failure can occur if the inflation equipment is not used correctly, due to the fact that a fully charged nitrogen cylinder's pressure is approximately 15000 kPa (2200 psi).

There are other benefits to using nitrogen in addition to reducing the risk of an explosion. The use of nitrogen for tire inflation lessens the slow oxidation of the rubber. Use of nitrogen also slows gradual tire deterioration. This is especially important for tires that are expected to have a long service life of at least four years. Nitrogen reduces the corrosion of rim components. Nitrogen also reduces problems that result from disassembly.

Illustration 1g00103698

------ WARNING! ------

Personal injury or death could result with improper tire inflation techniques.

Use a self-attaching inflation chuck and stand behind the tread when inflating a tire.

Note: Do not set the tire inflation equipment regulator higher than 140 kPa (20 psi) over the recommended tire pressure.

Use 6V-4040 Nitrogen Tire Inflation Group or an equivalent part to inflate tires from a nitrogen gas cylinder. Refer to Special Instruction, SMHS7867 for tire inflation instructions.

For nitrogen inflation, use the same tire pressures that are used for air inflation. Consult your tire dealer for operating pressures.