Transmission Oil - Change
`
651E Wheel Tractor-Scraper
[SEBU6963]
651E Wheel Tractor-Scraper
Transmission Oil Filter and Magnetic Screen - Replace/Clean
651E Wheel Tractor-Scraper
Walk-Around Inspection
POWER TRAIN
TANK GP
651E Wheel Tractor-Scraper
Transmission Oil - Change
Show/hide table
 |
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
Operate the engine until the transmission oil is warm. Park the machine on a level surface. Lower the bowl until the bowl exerts a slight downward pressure on the ground.
Engage the parking brake. Stop the engine.
- The transmission drain plug is located under the transmission.
- Remove the transmission drain plug and drain the oil into a suitable container.
Note: Discard the drained fluids according to local regulations.
Show/hide table
 | |
| Illustration 1 | g00103203 |
- Remove the sump drain plug and drain the oil into a suitable container.
Show/hide table
 | |
| Illustration 2 | g00103206 |
- Change the filter element. Refer to the Operation and Maintenance Manual, "Transmission Oil Filter and Magnetic Screen - Replace/Clean".
- Remove the cover for the scavenge screen.
Show/hide table
 | |
| Illustration 3 | g00103205 |
- Remove the scavenge screen from the housing.
- Wash the scavenge screen in a clean, nonflammable solvent.
- Clean the cover for the scavenge screen and inspect the seal. Replace the seal if damage or wear is evident.
- Insert the scavenge screen into the housing.
- Install the housing cover. Tighten the bolts in the housing cover.
- Clean the transmission drain plug and install the transmission drain plug.
- Clean the sump drain plug and install the sump drain plug.
- Fill the transmission with oil through the filler tube. Refer to the Operation and Maintenance Manual, "Capacities (Refill)" and the Operation and Maintenance Manual, "Lubricant Viscosities".
Show/hide table
 | |
| Illustration 4 | g00103211 |
- Remove the transmission breather.
Show/hide table
 | |
| Illustration 5 | g00103213 |
- Wash the transmission breather in a clean, nonflammable solvent.
- Install the transmission breather.
- Start the engine. Run the engine at low idle. Inspect the transmission for leaks.
- Slowly operate the transmission direction and speed control in order to circulate the oil.
- Maintain the oil level between the "FULL" and "ADD OIL" marks on the dipstick (1). Add oil through filler tube (2), if necessary.
Show/hide table
 | |
| Illustration 6 | g00103214 |
- Stop the engine.
Information System:
3208 Marine Engine
Hose Clamps
651E Wheel Tractor-Scraper
Transmission Oil Filter and Magnetic Screen - Replace/Clean
3208 Marine Engine
Metric (ISO) Fasteners
992G Wheel Loader and 854G Wheel Dozer Power Train
Torque Converter (Lockup)
3208 Marine Engine
Standard Torque for Worm Drive Band Hose Clamps
D5M Track-Type Tractor
Heating and Air Conditioning Controls
3208 Marine Engine
Maintenance Log
D6M Track-Type Tractor
Heating and Air Conditioning Controls
992G Wheel Loader and 854G Wheel Dozer Power Train
Torque Converter
D5M Track-Type Tractor
Refill Capacities
D5M Track-Type Tractor
Starting with Auxiliary Start Receptacle
D5M Track-Type Tractor
Walk-Around Inspection
992G Wheel Loader and 854G Wheel Dozer Power Train
Selector and Pressure Control Valve (Transmission)
651E Wheel Tractor-Scraper
Walk-Around Inspection
992G Wheel Loader and 854G Wheel Dozer Braking System
Parking Brake Control
992G Wheel Loader and 854G Wheel Dozer Power Train
Transmission Planetary
3208 Marine Engine
Customer Assistance
992G Wheel Loader and 854G Wheel Dozer Braking System
Piston Pump (Brake)
992G Wheel Loader and 854G Wheel Dozer Braking System
Service Brakes
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Vane Pump (Implement, Pilot and Braking)
992G Wheel Loader and 854G Wheel Dozer Braking System
Monitoring System (Brake Functions)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Service Brakes
D6R Track-Type Tractor
Gauges
D6R Track-Type Tractor
Light Switches