D6M Track-Type Tractor Machine Operation Information Caterpillar

To prevent injury, make sure that no maintenance work is being performed on the machine or near the machine. Keep the machine under control at all times in order to prevent injury.

Reduce the engine speed when you maneuver the machine in tight quarters or when you break over a rise.

Select the gear range that is necessary before you start the downgrade. Do not change gears when you are going downhill.

When you drive down a grade, use the same gear range that is used for driving up a grade.

1. Adjust the operator's seat.

2. Fasten the seat belt.

3. Raise all attachments enough to clear any unexpected obstructions.

Show/hide table



Illustration 1	g00649609

4. Push down on the brake pedal. This will prevent the machine from moving.

Show/hide table



Illustration 2	g00649231

5. Pull the parking brake lever upward in order to disengage the parking brake. Pull the parking brake lever upward in order to unlock the transmission lever.

Show/hide table



Illustration 3	g00649555

6. Move the transmission control lever to the desired direction and to the desired speed. Release the brake pedal in order to release the brakes. Release the brake pedal in order to allow the machine to move.

7. Move the governor control lever to the desired engine speed.

8. Drive the machine forward for best visibility and for control.