D6M Track-Type Tractor Engine Start Switch Caterpillar

Engine Start Switch

D6M Track-Type Tractor [SEBU6894]

D6M Track-Type Tractor Fuel System Secondary Filter - Replace

D6M Track-Type Tractor Ether Starting Aid

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

D6M Track-Type Tractor Battery Disconnect Switch

D6M Track-Type Tractor Engine Start Switch

D6M Track-Type Tractor Light Switches

Show/hide table




Illustration 1	g00650289

Show/hide table

OFF (1) - Inserting the engine start switch key and removing the key must only be done from the OFF position. In the OFF position, there is no power to most electrical circuits in the cab. The cab lights, the panel lights, the tail lights, and the dome light are operational even when the start switch is in the OFF position.

Turn the start switch key to OFF in order to stop the engine.

Show/hide table

ON (2) - Turn the start switch key clockwise to ON in order to activate all cab circuits.

Show/hide table

START (3) - Turn the start switch key clockwise to START in order to crank the engine. Release the key after the engine starts. The key will return to the ON position.

Show/hide table

Air Inlet Heater (4) - The air inlet heater provides preheating of the inlet air in order to assist starting the engine in cold weather. Turn the start switch key clockwise to the ON position. Push the switch (4) for the air inlet heater in order to preheat the inlet air. Operation time of the air inlet heater is dependent on ambient temperature.