EPC Parts Catalogs

928G Wheel Loader Hydraulic System Oil Level - Check Caterpillar


  1. Home
  2. Operation and Maintenance Manual
  3. #56226
Hydraulic System Oil Level - Check
`
928G Wheel Loader [SEBU7015]
928G Wheel Loader Hydraulic System Oil Filter - Replace
928G Wheel Loader Radiator Core - Clean
HYDRAULIC SYSTEM
TANK GP
928G Wheel Loader Hydraulic System Oil - Change
928G Wheel Loader Hydraulic System Oil Filter - Replace
928G Wheel Loader Hydraulic System Oil Level - Check

Note: Check the hydraulic system oil level with the machine on a level surface.

    Show/hide table

    Illustration 1g00449164

  1. Open the engine access door on the right side of the machine.
    Show/hide table

    Illustration 2g00101931

  1. Maintain the hydraulic oil level above the "ADD COLD" mark on the sight gauge.
    Show/hide table

    Illustration 3g00451011
    Show/hide table

    Illustration 4g00101934

  1. The hydraulic tank filler cap is located under the access panel on the top of the engine compartment. Remove the hydraulic tank filler cap and add hydraulic oil, if necessary.

  1. Clean the hydraulic tank filler cap. Install the hydraulic tank filler cap.

  1. Close the engine access door. Replace the access panel.

Information System:

928G Wheel Loader Hydraulic System Oil Filter - Replace
928G Wheel Loader Hydraulic System Oil - Change
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuel System - Prime
D6M Track-Type Tractor Bulldozer Blade Tilt
928G Wheel Loader Fuel System Water Separator Element - Replace
928G Wheel Loader Fuel System Primary Filter - Replace
515 Wheel Skidder and 525 Wheel Skidder Machine Retrieval
928G Wheel Loader Engine Oil and Filter - Change
651E Wheel Tractor-Scraper Air Conditioner - Test
928G Wheel Loader Engine Air Filter Secondary Element - Replace
D6R Track-Type Tractor Ripping
631E Series II Wheel Tractor-Scrapers Parking Brake Manual Release
D6M Track-Type Tractor Refill Capacities
928G Wheel Loader Radiator Core - Clean
D6M Track-Type Tractor Engine Oil and Filter - Change
561M Pipelayer Cooling System Coolant (DEAC) - Change
928G Wheel Loader Transmission Oil - Change
928G Wheel Loader Transmission Oil Filter - Replace
928G Wheel Loader Walk-Around Inspection
561M Pipelayer Bevel and Transfer Gears - Power Shift
Installation of Output Yoke and Screen Housing On Remanufactured Transmissions{3002, 3159}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Transmission Oil - Change
992G Wheel Loader and 854G Wheel Dozer Steering System Piston Pump (Steering)
D6M Track-Type Tractor Fuel System Primary Filter - Clean/Replace