928G Wheel Loader Engine Air Filter Secondary Element - Replace Caterpillar


Engine Air Filter Secondary Element - Replace
`
928G Wheel Loader [SEBU7015]
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
928G Wheel Loader Engine Air Filter Secondary Element - Replace


NOTICE

Always replace the secondary filter element. Never attempt to reuse it by cleaning.

The secondary filter element should be replaced at the time the primary element is serviced for the third time.

The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black.





Illustration 1g00449164

  1. Open the engine access door on the right side of the machine.



    Illustration 2g00101864

  1. Remove the air cleaner housing cover (1) .

  1. Remove the primary filter element (2) from the air cleaner housing.



    Illustration 3g00038606

  1. Remove the secondary filter element.



    Illustration 4g00101865

  1. Cover the air inlet opening. Clean the inside of the air cleaner housing.

  1. Inspect the gasket between the air inlet pipe and the air cleaner housing. Replace the gasket if the gasket is damaged.

  1. Uncover the air inlet opening. Install a new secondary element.

  1. Install the primary element and the air cleaner housing cover. Fasten the clips in order to secure the air cleaner housing cover.



    Illustration 5g00101866

  1. Reset the filter element indicator.

  1. Close the engine access door.