IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Radiator Core - Clean Caterpillar

Show/hide table

Illustration 1	g00290860

1. Open the engine hood. The radiator assembly is located at the rear of the machine.
   Show/hide table

   Illustration 2	g00315688

2. Remove two bolts (1). Swing hydraulic oil cooler (2) away from radiator (3).
   Show/hide table

   Illustration 3	g00315690

3. Remove two bolts (4). Swing air conditioner condenser (5) away from radiator (3).
   Show/hide table

   Illustration 4	g00101939

4. You can use compressed air, high pressure water, or steam to remove dust and other debris from the radiator fins. However, the use of compressed air is preferred.

5. Swing the hydraulic oil cooler back into the operating position and replace the two bolts.

6. Swing the air conditioner condenser back into the operating position and replace the two bolts.

7. Close the engine hood.

Low Sound Machines and Blue Angel Machines

Illustration 5	g00480311

1. Push the button and open the radiator grill that is located on the rear of the machine.
   Show/hide table

   Illustration 6	g00480313

2. Remove bolt (1). Swing hydraulic oil cooler (2) away from the radiator.

3. Remove two bolts (3). Swing air conditioner condenser (4) away from the radiator.
   Show/hide table

   Illustration 7	g00101939

4. You can use compressed air, high pressure water, or steam to remove dust and other debris from the radiator fins. However, the use of compressed air is preferred.

5. Swing the hydraulic oil cooler back into the operating position and replace the bolt.

6. Swing the air conditioner condenser back into the operating position and replace the two bolts.

7. Close the radiator grill.