902 and 906 Compact Wheel Loaders Battery, Battery Cable or Battery Disconnect Switch - Replace Caterpillar


Battery, Battery Cable or Battery Disconnect Switch - Replace
`

  1. Turn the engine start switch to the OFF position. Turn all switches to the OFF position.



    Illustration 1g00295810

  1. Open the access panel on the left side of the machine.



    Illustration 2g00317644

  1. If the machine is equipped with a battery disconnect switch, turn the switch to the OFF position. Remove the battery disconnect switch key.

    Note: If the machine is not equipped with a battery disconnect switch, disconnect the negative battery cable from the frame. Then, continue with step 5.


    NOTICE

    Do not allow the disconnected battery cable to contact the disconnect switch.


  1. At the battery disconnect switch, disconnect the negative battery cable that is connected to the frame.



    Illustration 3g00348192

  1. Remove the battery cover. Disconnect the negative battery cable at the battery.

  1. Perform the necessary repairs. Replace the cable or the battery, as needed.

  1. Connect the negative battery cable at the battery. Replace the battery cover.

  1. Connect the battery cable at the battery disconnect switch, if equipped. If the machine is not equipped with a battery disconnect switch, connect the negative cable to the frame.

  1. Install the battery disconnect switch key. Turn the battery disconnect switch to the ON position.