Lifting and Tying Down the Machine
`
928G Wheel Loader
[SEBU7015]
MACHINE ARRANGEMENT
Show/hide table
 | |
| Illustration 1 | g00451014 |
Show/hide table
| NOTICE |
|---|
Improper lifting or tie-downs can allow the load to shift and cause injury or damage. Install the steering frame lock link before lifting. |
- Weight and instructions are listed herein. This information is applicable to units that are manufactured by AVSpare.
The 928G Wheel Loader weighs 13280 kg (29277 lb).
Note: Weights may vary with different attachments.
- For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level machine lift.
- Spreader bar widths should be sufficient for preventing contact with the machine.
- Two rear holes and two front holes are provided for tie-downs. Use these holes.
Show/hide table
 | |
| Illustration 2 | g00101788 |
Show/hide table
 | |
| Illustration 3 | g00101789 |
Install the tie-downs at several locations. Place blocks under the front wheels and under the rear wheels.
Check the appropriate laws that govern the weight of the load. Check the appropriate laws that govern the width of the load and the length of the load.
Consult your AVSpare dealer for shipping instructions for your machine.
Information System:
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Circuit Breakers - Reset
928G Wheel Loader
Shipping the Machine
D6M Track-Type Tractor
Transmission Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
D6M Track-Type Tractor
Engine Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Specifications
928G Wheel Loader
Bulldozing and Dumping
854G Wheel Dozer Hydraulic System
Hydraulic Tank (Steering, Brake)
928G Wheel Loader
Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier
Engine Starting with Auxiliary Start Receptacle - If Equipped
D6M Track-Type Tractor
Walk-Around Inspection
992G Wheel Loader Electrohydraulic System
Pressure Sensor (Implement Pilot Oil)
928G Wheel Loader
Towing the Machine
651E Wheel Tractor-Scraper
Directional Turn Signal and Hazard Flasher Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Hydraulic System Oil Filter - Replace
651E Wheel Tractor-Scraper
Heating and Air Conditioning Control
966G and 972G Wheel Loaders
Hydraulic System Oil - Change
631E Series II Wheel Tractor-Scrapers
Seat Belt
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Engine Oil and Filter - Change
928G Wheel Loader
Autoshift Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
561M Pipelayer
Transmission Selector and Pressure Control Valve - Power Shift
966G and 972G Wheel Loaders
Secondary Steering - If Equipped